We describe a two-step dealloying/compaction process to produce nanocrystalline Au. First, nanocrystalline/nanoporous Au foam was synthesized by electrochemically driven dealloying. The resulting Au foams exhibited porosities of ∼60% with pore sizes of 40 and 100 nm and a typical grain size of <50 nm. Second, the nanoporous foams were fully compacted to produce nanocrystalline monolithic Au. Th...

The tensile properties of Mg-3%Al nanocrystalline alloys were investigated at different test environment. Bulk nanocrystalline samples of these alloy was successfully prepared by mechanical alloying (MA) followed by cold compaction, sintering, and hot extrusion process. The crystal size of the consolidated milled sample was calculated by X-Ray line profile analysis. The deformation mechanism an...

In this study, the microstructural, mechanical, adhesion, and hemocompatibility properties of nanocrystalline diamond coatings were examined. Microwave plasma chemical vapor deposition (MPCVD) was used to deposit nanocrystalline diamond coatings on silicon (100) substrates. The coating surface consisted of faceted nodules, which exhibited a relatively wide size distribution and an average size ...

The atomistic mechanisms active during plastic deformation of nanocrystalline metals are still a subject of controversy. The recently developed approach of combining automated crystal orientation mapping (ACOM) and in situ straining inside a transmission electron microscope was applied to study the deformation of nanocrystalline Pd x Au1- x thin films. This combination enables direct imaging of...

Macroscopic strain was hitherto considered a necessary corollary of deformation twinning in coarse-grained metals. Recently, twinning has been found to be a preeminent deformation mechanism in nanocrystalline face-centered-cubic (fcc) metals with medium-to-high stacking fault energies. Here we report a surprising discovery that the vast majority of deformation twins in nanocrystalline Al, Ni, a...

In this work, various emerging core and winding materials suitable for a high frequency planar transformer (PT) has been analyzed compared. Core used in significant effect mostly the losses of transformer. Emerging like amorphous nanocrystalline cores were compared against conventional ferrite core. The results obtained showed that reduced by around 48.14% on using or instead cores. Typical cop...

We demonstrate a simple strategy to either prevent or enhance hydroxide incorporation in nanocrystalline solid-state metathesis reaction products prepared in ambient environments. As an example, we show that ZnCO3 (smithsonite) or Zn₅(CO₃)₂(OH)₆ (hydrozincite) forms extremely rapidly, in less than two minutes, to form crystalline domains of 11 ± 2 nm and 6 ± 2 nm, respectively. The phase select...

Nanocrystalline silicon microwires are self-heated through single, large amplitude, and microsecond voltage pulses. Scanning electron micrographs show very smooth wire surfaces after the voltage pulse compared to as-fabricated nanocrystalline texture. Voltage-pulse induced self-heating leads to significant conductance improvement, suggesting crystallization of the wires. The minimum resistivity...

The effect of coherency WC/Co phase boundaries on the fracture toughness of the nanocrystalline WC-Co cemented carbides is studied by MD simulation method. The simulation results show that the nanocrystalline WC-Co cemented carbides with coherency WC/Co phase boundaries has higher fracture toughness than that without coherency WC/Co phase boundaries. Moreover, the mechanism of why coherency WC/...