abstract in respect to nano-technological studies and physiological and biochemical lesions of these materials on aquatic animals, in this study we examine the toxicity effects of nano-zinc oxide (zno nps) on hematological indices of common carp (cyprinus carpio). lc50 of nano zinc oxide was determined according to the mortality at 24, 48, 72 and 96 hours, respectively. during separate experime...

automotive and aerospace industries are required to light materials which have high properties. this causes to reduce production cost and fuel consumption. one of these advanced materials that have been attracted at these decades is particulate metal matrix nanocomposites. these materials have a combination of ductile matrix alloy properties and ceramic reinforcement nanoparticles. powder metal...

nanofluid is a new class of heat transfer fluids engineered by dispersing metallic or non-metallic nanoparticles with a typical size of less than 100 nm in the conventional heat transfer fluids.this article aims to investigate the overall and convection heat transfer coefficient and nusselt number of al2o3-water nanofluid flowing in a horizontal double pipe heat exchanger under turbulent flow (...

The array of numerous metallic nanowires with straight shape has much attention due to their shape anisotropy and extremely large surface area. This unique structure can be applied to develop the novel functional nano-materials such as electronic, magnetic and optical nano-scale devices. Metallic nanowires can be fabricated by manipulating metallic atoms one by one using a scanning tunneling mi...

friction stir processing was applied for fabricating an aluminum alloy based hybrid nano composite reinforced with nano sized al2o3 and micro sized graphite particles. a mixture of al2o3 and graphite particles was packed into a groove with 1 mm width and 4.5 mm depth, which had been cut in 5083 aluminum plate of 10 mm thick. packed groove was subjected to friction stir processing in order to im...

Oil palm ash (OPA), a bio-agricultural waste from oil palm mills, was subjected to high-energy ball milling for 30 h and was converted into a nano-structured material. The nano-structured OPA was characterized for its particle size and crystallinity index by using Transmission Electron Microscopy (TEM) and X-ray Diffraction (XRD) analysis. The crystallite size obtained from TEM and XRD was foun...

OBJECTIVE The purpose of this study was to evaluate the effects of three different surface conditioning methods on the shear bond strength (SBS) of metal brackets bonded directly to gold alloy with chemically cured resin. METHODS Two hundred ten type III gold alloy specimens were randomly divided into six groups according to the combination of three different surface conditioning methods (alu...

The use of aluminum oxide as the gate insulator for low temperature (600 C) polycrystalline SiGe thin-film transistors (TFT’s) has been studied. The aluminum oxide was sputtered from a pure aluminum target using a reactive N2O plasma. The composition of the deposited aluminum oxide was found to be almost stoichiometric (i.e., Al2O3), with a very small fraction of nitrogen incorporation. Even wi...

the use of an inorganic phase in water-in-oil (w/o) microemulsion   has   received considerable attention recently for preparing metal oxide   nanoparticles. this is a technique, which allows preparation of ultrafine   metal oxide nanoparticles within the size range 40 to 80 nm. preparation of   nano zno and cr 2 o 3 studied, investigated in the inverse   microemulsion system. therefore the nuc...

Southern pine specimens vacuum-treated with nano-zinc oxide (nano-ZnO) dispersions were evaluated for leach resistance and UV protection. Virtually, no leaching occurred in any of the nano-ZnO-treated specimens in a laboratory leach test, even at the highest retention of 13 kg/m(3). However, specimens treated with high concentrations of nano-ZnO showed 58-65% chemical depletion after 12 months ...