The proton conductivity of a series of extruded Nafion membranes @of equivalent weight ~EW! of 1100 and nominal dry thickness of 51, 89, 127, and 178 mm# has been studied. Measurements were made in 1 M H2SO4 at 298 K using a four-electrode, dc technique. The membrane area resistance increases with thickness, as expected, from 0.07 to 0.16 V cm for Nafion 112 and Nafion 117, respectively. Howeve...

A simple and cost effective solid-phase microextraction device has been developed. Fused-silica capillaries were etched with ammonium hydrogen difluoride prior to coating with an ionic liquid. For comparison, both a bare fused-silica capillary and one pretreated with a Nafion membrane were coated with the ionic liquid. All three coated capillaries were employed for the head space microextractio...

An optimal environment for glucose oxidase (GOx) in Nafion membranes is achieved using an advanced immobilization protocol based on a nonaqueous immobilization route. Exposure of glucose oxidase to water-organic mixtures with a high (85-95%) content of the organic solvent resulted in stabilization of the enzyme by a membrane-forming polyelectrolyte. Such an optimal environment leads to the high...

A series of nanocomposites have been prepared from perfluorosulfonylfluoride copolymer resin (Nafion) and layered montmorillonite (MMT) modified with protonated dodecylamine by conventional sol-gel intercalation. The structure of these nanocomposite materials have been characterized using FT-IR, elemental analysis, XRD and solid state NMR techniques, including 19F magic-angle spinning (MAS) NMR...

The hydrolysis of sodium borohydride as a source of hydrogen gas is studied at different mole ratios of H+ to NaBH4. The sulfonated porous carbon (SPC) is used as a source of hydrogen ion and catalyst. It is found that the sulfonated porous carbon exhibits high activity for the hydrolysis of NaBH4 to generate hydrogen gas at room temperature in comparison to Amberlyst-15 and Nafion-NR50. The ki...

The reaction of Cu(dmp)2 with NO has been investigated for potential development into an optical fibre chemical sensor. In aqueous solutions, a linear calibration (r= 0.9950) was obtained between 0 and 2.5 M NO with a detection limit of 0.32 M (∼0.0096 ppm) (s/n = 3). The complex electrostatically immobilised in nafion produced a highly linear calibration (r= 0.999) between 0 and 3 ppm in NO ga...

the hydrolysis of sodium borohydride as a source of hydrogen gas is studied at different mole ratios of h+ to nabh4. the sulfonated porous carbon (spc) is used as a source of hydrogen ion and catalyst. it is found that the sulfonated porous carbon exhibits high activity for the hydrolysis of nabh4 to generate hydrogen gas at room temperature in comparison to amberlyst-15 and nafion-nr50. the ki...

Operating temperature can be a limiting factor in reliable applications of Proton Exchange Membrane (PEM) fuel cells. Nanoindentation tests were performed on perfluorosulfonic acid (PFSA) membranes (Nafion® 117) in order to study the influence of the temperature condition on their mechanical properties. The hardness and reduced modulus of Nafion® 117 were measured within a certain temperature r...

The use of thinner membranes in polymer electrolyte water electrolysis increases the likelihood forming an explosive H 2 /O mixture anode stream. Doping Pt nanoparticles into a Nafion membrane as recombination catalyst effectively lowers hydrogen crossover. Here, we propose additional co-doping cerium-zirconium oxide radical scavenger to mitigate degradation. Our results show over 4-fold reduct...

Polycyclic aromatic hydrocarbons are very stable compounds and tend to bioaccumulate in the environment due to their high degree of conjugation and aromaticity. Hydrous pyrolysis is explored as a technique for the treatment of industrial water containing PAH, using anthracene as a model compound. The reactivity of anthracene under a range of temperatures and durations are studied in this paper....