The effect of laser cladding on the surface microstructure and corrosion properties of coated/uncoated specimens were investigated. Fe-based alloy coating was produced on 35CrMo steel by laser cladding. The phase composition, microstructure, interface element distribution, microhardness and corrosion resistance of the cladding coating were measured. The results show that the cladding layer is m...

Two solution-based methods, metallo-organic decomposition and sol–gel processes, were used to study the effects of precursor solution type on the microstructure evolution and texture development of oriented PZT films. Microstructure development and perovskite content are strongly dependent on the heating rate. Fast heating rate forms a dense fine-grained microstructure with (111) orientation. I...

Parasite findings in sambaquis (shell mounds) are scarce. Although the 121 shell mound samples were previously analysed in our laboratory, we only recently obtained the first positive results. In the sambaqui of Guapi, Rio de Janeiro, Brazil, paleoparasitological analysis was performed on sediment samples collected from various archaeological layers, including the superficial layer as a control...

The use of Fe-Al intermetallic compound coatings has been investigated in order to improve the tribological behaviour of carbon tool steel. The coatings were formed by a pack cementation process and subsequently diffusion annealing at 900˚C in an argon controlled atmosphere. The optimum diffusion time was selected on the basis of optimum thickness and tribological behaviour. The microstructure...

[1] We present a model for the study of the effect of rheological hysteresis on compaction in sedimentary basins, when surface loading and unloading occurs. When compaction is slow (sedimentation rate is large and/or permeability is small), the hysteresis has little effect on the basal compaction layer, but in the more realistic case where compaction is fast (i.e., sedimentation is slow and/or ...

TiO2 nanoparticles, a semiconductor photocatalyst is widely used in various applications especially for water treatment. The common problems the application are separating nanoparticles from body and recovering it to be reused. This research was conducted investigate aggregation sedimentation properties of via chemical addition. experiment carried out 5 hours by varying pH, ionic strength, addi...

The microstructure in the surface layer of a pure iron plate was refined at the nanometer scale by means of a surface mechanical attrition treatment that generates repetitive severe plastic deformation of the surface layer. The subsequent nitriding kinetics of the treated iron with the nanostructured surface layer were greatly enhanced, so that the nitriding temperature could be as low as 300 d...

The microstructure morphologies and oxide distribution of copper bonded wafers were examined by means of transmission electron microscopy (TEM) and energy dispersion spectrometer (EDS). Cu wafers exhibit good bond properties when wafer contact occurs at 400°C/4000 mbar for 30 min, followed by an anneal at 400°C for 30 min in N2 ambient atmosphere. The distribution of different defects showed th...