In this paper, the design of rectangular dielectric resonator antenna (RDRA) with coaxial probe and microstrip line feed arrangements and corresponding return loss vs. frequency characteristics and radiation performance in C-band of microwave frequencies using finite integration method (CST Microwave Studio) and verified by finite element method (Ansoft High Frequency Structure Simulator) are p...

A microstrip reflectarray is a flat reflector antenna that can be mounted conformally onto a spacecraft’s outside structure without consuming a significant amount of spacecraft volume and mass. For large apertures (2 m or larger), the antenna’s reflecting surface, being flat, can be more easily and reliably deployed than a curved parabolic reflector. This article presents the study results on a...

A method for increasing the bandwidth of microstrip array antenna by adding additional resonator, which is directly – coupled to the non – radiating edges of a radiating element is narrated. The experimental result of four elements non-radiating edge directly – coupled rectangular microstrip array antenna (FNCRMAA) shows wide band with bandwidth of 15.63 %. Further extending the elements of arr...

Substrate integrated waveguide (SIW) is a new form of transmission line. It facilitates the realization of nonplanar (waveguide based) circuits into planar form for easy integration with other planar (microstrip) circuits and systems. This paper describes the design of an SIW to microstrip transition. The transition is broadband covering the frequency range of 8 – 12GHz. The measured in-band in...

─ A novel ultra-wideband (UWB) out-ofphase four-way power divider is presented. To achieve a division over a large frequency range, Tjunctions formed by slotlines and microstrip lines are utilized. Based on the transmission-line equivalent-circuit method, we derive the design equations of the proposed power divider. Furthermore, all measured results are in good agreement with the predicted desi...

In this paper, a microstrip transmission line combined with a new U-headed dumb-bell defected ground structure (DGS) is investigated. The proposed DGS of two U-shape slots connected by a thin transverse slot is placed in the ground plane of a microstrip line. A finite cutoff frequency and attenuation pole is observed and thus, the equivalent circuit of the DGS unit can be represented by a paral...

A planar magnetoinductive (MI) waveguide loaded rectangular microstrip patch antenna is presented and discussed. The MI waveguide consists of two planar metamaterial split squared ring resonators (SSRRs) placed in between two microstrip lines. The backward wave propagation takes place through this structure. The rectangular microstrip patch antenna is magnetically coupled to the MI waveguide. T...

A central tracker based on silicon microstrip sensors has been envisaged for the e + e − linear collider experiments. A full simulation program based on GEANT4 has been developed to study performance of the tracker. We report some preliminary results obtained using this program. The use of silicon microstrip detectors as precise tracking devices in colliding-beam experiments has been well estab...

Abstract—In this work, a millimeter wave microstrip frequency-mixer design based on graphene is presented. The desired frequency mixing behavior is obtained using a nonlinear component consisting in a microstrip line gap covered by a graphene layer. The circuit includes microstrip filters that have been designed to obtain a high isolation between the input and output ports. The nonlinear behavi...

This paper has presented the characteristic impedance and signal propagation delay time for both surface and embedded microstrip lines that comprise a conducting strip line with width w, thickness t of conductivity σ, on a substrate of thickness h, relative permittivity εr, relative permeability sub, on top of an infinite grounded electrode. The strips couples to the ground plane. It is observ...