A maximal product of stiffness and viscoelastic damping (E tan d), a figure of merit for damping layers, is desirable for structural damping applications. Particulate-reinforced metal–matrix composites were prepared by ultrasonic agitation of the melt and composed of the zinc–aluminum (ZnAl) alloy Zn80Al20 (in wt%) as the lossy matrix and SiC or BaTiO3 as the particulate reinforcements. ZnAl–Si...

The influence of the fiber used as reinforcement in resin matrix composite materials submitted to repeated low energy impacts is analyzed. The aramid, glass and carbon fiber composites were submitted to drop weight tests from 0.5m and from 1m. The number of impact events necessary to cause failure was recorded, and the fracture characteristics of each composite were analyzed by optical microsco...

Hybrid composites are characterized by a variety of properties that are of interest to automotive applications, including strength, mechanical, and thermal properties. In this work, palm kernel shell-filled maleated polypropylene composites and palm kernel shell/nanosilica-filled maleated polypropylene hybrid composites were produced using a Brabender Internal Mixer. The results showed that the...

Zr2WP2O12/ZrO2 composites were fabricated by solid state reaction with the goal of tailoring the thermal expansion coefficient. XRD, SEM and TMA were used to investigate the composition, microstructure, and thermal expansion behavior of Zr2WP2O12/ZrO2 composites with different mass ratio. Relative densities of all the resulting Zr2WP2O12/ZrO2 samples were also tested by Archimedes' methods. The...

Rheological behavior of high-density polyethylene (HDPE)-wood flour composites with different wood contents was examined using steady shear sweep, oscillatory frequency sweep, creep test, and stress relaxation test. The samples were prepared using a melt compounding method in a twin-screw extruder. The results showed that the yield stress did not appear for the composites prepared under the pro...

The main aim of this work was to study the effect of sisal fiber surface treatments on water uptake behavior of composites based on untreated and treated fibers. For this purpose, sisal fibers were treated with different chemical treatments. All surface treatments delayed the water absorption of fibers only for a short time of period. No significant differences were observed in water uptake pro...

Due to their susceptibility to bacterial biofilm formation, commercial tubes for medical use are one of the main sources of hospital infections with Acinetobacter baumannii. The anti-biofouling activity of novel composites against the clinical isolate of the multi-drug resistant A. baumannii is reported here. The composites were prepared by addition of micronised silver-exchanged natural zeolit...

The effect of pseudowollastonite (Pw) additions on the in vitro bioactivity and compressive strength of composites based on calcium aluminate cement (CAC) was studied. Composites were prepared by mixing calcium aluminate clinker with pseudowollastonite (5 and 10 wt%) at a w/c ratio of 0.4 (0.015M LiCl aqueous solution). In order to assess the in vitro bioactivity and compressive strength, compo...

William G. Fahrenholtz o 9m Ceramic Engineering Department ‘so University of Missouri-Rolls w~!!l Rolls, MO 65409 + <. +# Metal-reinforced Alz03-matrix composites were prepared using reactive hot pressing. The volume fraction of the reinforcing phase was controlled by the stoichiometry of the particular displacement reaction used. Dense Alz03-Ni and Al@3-N’b composites were fabricated using thi...

We have developed a simple one-step method to synthesize novel supramolecular polysaccharide composites from cellulose (CEL), chitosan (CS) and benzo-15-crown 5 (B15C5). Butylmethylimidazolium chloride [BMIm(+)Cl(-)], an ionic liquid (IL), was used as a sole solvent for dissolution and preparation of the composites. Since majority of [BMIm(+)Cl(-)] used was recovered for reuse, the method is re...