components for the reconstruction of the acetabulum and metal femoral head components for conventional THA and RHA. The ACCIS®metal components are made of a chrome-cobalt-molybdenum alloy, but are different from other metal-on-metal prostheses. The surfaces of the metal components are engineered with the ceramic Titanium-Niobium-Nitride (TiNbN) in order to minimize metal particulate wear, to pr...

In the present study, the Weldability and microstructure of dissimilar welds of AISI 347austenitic stainless steel to ASTM A335 low alloy steel was investigated. For this purpose, gas tungsten arc welding process and two filler metals including ERNICr-3 and ER309L were used. After welding, the microstructure of the different zones of each joint, including weld metals, heat affected zone (HAZ) 1...

The influence of the addition of polycrystalline Pt, Pd and Ni powders into hydride-forming metal alloy electrodes on the activation process, r t s o ©

AuAg alloy clusters protected with octadecanethiol (ODT) monolayers form crystalline solids whose powder X-ray diffractograms can be indexed to single cubic unit cells. These solids can also be regarded as superlattices of alloy clusters. The bulk Au:Ag ratio is significantly different from the metal salt feed ratio used for the synthesis of the alloy clusters. The surface plasmon resonance ban...

This study evaluated the influence of water storage conditions and the effect of metal priming agents on bond strength and durability of four luting agents joined to gold alloy. Disk specimens were cast from a gold alloy (Degudent U), and the surfaces were ground flat with abrasive paper. Three surface conditions employed were: unprimed, primed with Alloy Primer, and primed with Metaltite. Thre...

The Embryonic Stem Cell Test (EST) developed in Germany in 1997 is known as a screening test method capable of predicting the presence of unknown chemicals influencing normal human development. Firstly, we investigated the embryotoxicity of 24 types of monomer including dental monomers and dental alloy-component metal elements using this test. Monomers including Bis-GMA contained in base resin ...

In order to illustrate how atomistic modeling is being used to determine the structure, physical, and chemical properties of materials at the nanoscale, we present here the results of molecular dynamics (MD) simulations on nanoscale assemblies of such materials as carbon nanotubes, diamond surfaces, metal alloy nanowires, and ceramics. We also include here the results of nonequilibrium MD simul...

Metal release from implantable metals and the properties of oxide films formed on alloy surfaces were analyzed, focusing on the highly biocompatible Ti-15Zr-4Nb-4Ta alloy. The thickness and electrical resistance (Rp) of the oxide film on such an alloy were compared with those of other implantable metals. The quantity of metal released during a 1-week immersion test was considerably smaller for ...

A solid reduction process is described whereby chromite is reduced with the help of calcium chloride to produce ferrochrome alloy powders with high metal recovery. The process involves segregation reduction of chromite using graphite as the reductant and calcium chloride as the segregation catalyst. Experiments were performed in the temperature range of 1200–1400 ◦C to evaluate the influences o...

PURPOSE The purpose of this study was to evaluate cell toxicity due to ion release caused by galvanic corrosion as a result of contact between base metal and titanium. MATERIALS AND METHODS It was hypothesized that Nickel (Ni)-Chromium (Cr) alloys with different compositions possess different corrosion resistances when contacted with titanium abutment, and therefore in this study, specimens (...