In this paper, we perform two-dimensional simulations of cross-flow forward osmosis (FO) membrane modules in the presence of draw and feed channel spacers. For this purpose, the equations corresponding to the conservation of mass, momentum, and convection-diffusion for the mass fraction of solute are solved using a commercial finite volume flow solver. We consider six configurations of channel ...

In this study, a novel integrated Hybrid Airlift Membrane Bioreactor (HAMBR) composed of oxic, anoxic, and anaerobic zones was developed to simultaneously remove organic matter and nitrogen from real paper-recycling wastewater. The removal efficiencies of Chemical Oxygen Demand (COD), ammonium, nitrite, nitrate and Total Nitrogen (TN) for permeate and supernatant were in the range of ...

terms and conditions of current drinking water quality standards, including reducing the maximum arsenic concentration from 50 μgl-1 to 10 μgl-1 and predicted stricter standards in future, reveals the necessity for development of new technologies. this study aimed to prepare and evaluate a new nanocomposite membrane using graphene oxide (go) thin layer to remove arsenic (v) from water. to fabri...

this study focuses on the preparation and modification of a thin-film composite (tfc) hollow fiber polyamide membrane fabricated by the interfacial polymerization of piperazine (pip) and trimesoyl chloride (tmc) on a porous polysulfone substrate. the effects of triethylenetetramine (teta) and silica nanoparticles (sio2) contents in the aqueous phase (as the additives) on the morphology and perf...

modified cellulose acetate (ca) membranes were prepared by dissolving the polymers in a mixture of acetone (ac) and n, n dimethylacetamide (dmac) (70:30) solvent and deionized (di) water was used in the coagulation bath. the introduction of polyethylene glycol (peg) additive and tio2 nanoparticles (nps) into the casting solution has changed the structures of the resulting membranes during the p...

abstract— in the present study, genetic programming (gp) as a completely different approach in comparison with conventional methods, based on the imitation of natural evolution of living organism is proposed for the prediction of cellulose acetate (ca) polymeric membrane characteristics. the membrane preparation parameters of polymer concentration, additive concentration and coagulation bath te...

In this work, polyvinylchloride (PVC) membrane prepared via casting solution technique and phase inversion method. N, N dimethylacetamide (DMAC) was used as primary solvent and Tetrahydrofuran (THF) was used as a co-solvent. The effects of parameters such as membrane thickness, evaporation time of casting film before immersion precipitation and addition of polyethylenglchol (PEG) on PVC membran...

in this research, modification on the ultrafiltration (uf) membrane by synthesis of a thin layer of polyamide selective layer was designed for high performances of forward osmosis (fo) water treatment. two monomers, m-phenylenediamine (mpd) and trimesoyl chloride (tmc) with different concentrations of mpd (2.0% w/v and 1.0% w/v) were reacted with tmc (0.15% w/v) for interfacial polymerization (...

The spiral-wound element is an industry standard because of its high membrane area packing density, low cost of manufacture, and extensive installation base worldwide. Plastic mesh spacers create a feed-channel between facing membrane leafs and promote turbulent flow, which aids to reduce solute concentration polarization and related scaling and fouling phenomena. Computational and experimental...