The fracture rate of third-generation ceramic liners is greatly reduced compared with first- and second-generation liners because of improvements in the design and manufacturing process. Fractures of the alumina-bearing couple are rare for the same reason.This article describes a case of a fracture of an alumina-bearing couple delta ceramic liner without trauma history that was treated with cer...

Interfacial fracture toughness and cyclic fatigue-crack growth properties of joints made from 99.5% pure alumina partially transient liquid-phase bonded using copper/niobium/copper interlayers have been investigated at both room and elevated temperatures, and assessed in terms of interfacial chemistry and microstructure. The mean interfacial fracture toughness, Gc, was found to decrease from 39...

Nanoporous and single phase α-alumina membranes with pore diameters tunable over a wide range of approximately 60-350 nm were successfully fabricated by optimizing the conditions for anodizing, subsequent detachment, and heat treatment. The pore diameter increased and the cell diameter shrunk upon crystallization to α-alumina by approximately 20% and 3%, respectively, in accordance with the 23%...

We investigated the fibrovascular ingrowth and fibrovascular tissue maturation of hydroxyapatite-coated, porous alumina sphere (Alumina sphere) in comparison with the hydroxyapatite sphere (HAp sphere) in rabbits. Alumina spheres and HAp spheres were implanted in the left orbits of 42 New Zealand white rabbits after enucleation. Fibrovascular ingrowth and maturation were graded from 1 to 5 at p...

Results from an ongoing study of the high temperature oxidation of intermetallic compounds in the Ti-Al system are presented. The oxidation behavior of alloys based on TiAl (y) has been found to be extremely complex depending on temperature and atmosphere composition. Protective alumina scales are formed in pure O2 up to a critical temperature above which a mixed Ti02/A1203 scale forms and grow...

lstituto Beni Culturali (Institute for Cultural Heritage) is the cultural institution of Regione Emilia Romagna. IBC web site [6] has been completely revised in cooperation with Hypermedia Open Center [S], the laboratory of the Electronics and Information Department at Politecnico di Milano. We adopted W2000 model for requirements analysis and for the analysis and organization of the applicatio...

Significant differences inseveralcomponents of bronchoalveolar lavage fluid (BAL fluid) have previously been reported in aluminium potroom workers compared with controls. The present paper describes the long term effects in rats of one time exposure to potroom aluminium oxide without fluorides (primary alumina (PA)) or with adsorbed fluorides (secondary alumina (SA) ) on components of BAL fluid...

In the present investigation surface modification of silica nanoparticles by alumina was carried out by sol-gel process. Fourier transform infrared (FTIR) and X-ray fluorescence (XRF) confirmed the synthesis of silica and the surface modification as alumina is anchored to silica surface. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) investigation...

In the present investigation surface modification of silica nanoparticles by alumina was carried out by sol-gel process. Fourier transform infrared (FTIR) and X-ray fluorescence (XRF) confirmed the synthesis of silica and the surface modification as alumina is anchored to silica surface. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) investigation...

BACKGROUND Ceramic-on-ceramic couplings are attractive alternative bearing surfaces that have been reported to eliminate or reduce problems related to polyethylene wear debris. Disappointing experiences with alumina ceramic bearings in the past have led to many improvements in the manufacture and design of ceramic implants. The purpose of the present study was to report the results of contempor...