A simple method of nanoparticle decoration can be used in the detection of pneumococcus. After the pneumococcal bacteria were captured by an antibody (pneumococcal C-polysaccharide (PnC) antibody) between the interdigitated electrodes, the gold nanoparticles conjugated with the PnC antibodies were let to bind onto an outer membrane of the bacteria. Upon successfully dense decoration, the bacter...

This paper proposes the design of a biosensor to characterize the dielectric and conductive properties of biological materials (for example blood or water) by impedance spectroscopy. Particularly, its design optimized the geometric structure interdigitated electrodes. This optimization allows extending the frequency range of measurement by reducing the polarization effect. Polarization effect i...

A study on the application of V(2)O(5)/WO(3)/TiO(2) (VWT) as the sensitive material for resistive-type SO(2) sensor was conducted, based on the fact that VWT is a well-known catalyst material for good selective catalytic nitrogen oxide reduction with a proven excellent durability in exhaust gases. The sensors fabricated in this study are planar ones with interdigitated electrodes of Au or Pt. T...

This paper proposes a novel concept of dielectrophoresis (DEP)-active hydrophoretic focusing of micro-particles and murine erythroleukemia (MEL) cells. The DEP-active hydrophoretic platform consists of crescent shaped grooves and interdigitated electrodes that generate lateral pressure gradients. These embedded electrodes exert a negative DEP force onto the particles by pushing them into a narr...

This paper presents the fabrication and characterization of a flexible gas sensor based on TiO2 nanotubes membrane, onto which array interdigitated gold electrodes in one side and a common heater in the backside were obtained using conventional microfabrication techniques. This was used to detect hydrogen sulphide within a concentration range of 6–38 ppm. The response to low concentrations of H...

A two-dimensional numerical simulation study has been performed to model an electrohydrodynamic (EHD) micropump. The micropump consists of an array of interdigitated electrodes along the top and bottom of the micropump channel. The focus of the simulations was to study the effects of electrode gap, stage gap, channel height, and applied voltage. The numerical results were first validated with e...

An inkjet-printed relative humidity sensor based on capacitive changes which responds to different humidity levels in the environment is presented in this work. The inkjet-printed silver interdigitated electrodes configuration on the paper substrate allowed for the fabrication of a functional proof-of-concept of the relative humidity sensor, by using the paper itself as a sensing material. The ...

We propose a new in-plane switching (IPS) nematic liquid crystal (LC) mode which uses a twist effect with a hybrid LC alignment and interdigitated electrodes as an approach for a high brightness. This is optimized to a normally white mode to minimize loss of transmittance at the electrode compared to the conventional IPS mode. The proposed mode shows an excellent dark state because the bulk LCs...

We use the Onsager principle to derive a two-phase continuum formulation for the hydrodynamics of the electrorheological (ER) fluid, consisting of dielectric microspheres dispersed in an insulating liquid. Predictions of the theory are in excellent agreement with the experiments. In particular, it is shown that whereas the usual configuration of applied electric field being perpendicular to the...

To date, materials selection in microfluidics has been restricted to conventional micromechanical materials systems such as silicon, glass, and various polymers. Metallic materials offer a number of potential advantages for microfluidic applications, including high fracture toughness, thermal stability, and solvent resistance. However, their exploitation in such applications has been limited. I...