We prepared of electrodes that consist of TiO2 with addition of tin-doped indium oxide (ITO) or fluorine-doped tin oxide (FTO) nanoparticles and the application of such electrodes on dye-sensitized solar cell. As compared to TiO2 alone, the addition of ITO and FTO nanoparticles resulted in an efficiency improvement of ~ 20% up to ~ 54% for the TiO2ITO and TiO2-FTO systems, respectively. This im...

Theoretical estimates indicate that graphene thin films can be used as transparent electrodes for thin-film devices such as solar cells and organic light-emitting diodes, with an unmatched combination of sheet resistance and transparency. We demonstrate organic light-emitting diodes with solution-processed graphene thin film transparent conductive anodes. The graphene electrodes were deposited ...

Vertically aligned p-type silicon nanowire (SiNW) arrays were fabricated through metal-assisted chemical etching (MACE) of Si wafers. An indium tin oxide/indium zinc oxide/silicon nanowire (ITO/IZO/SiNW) heterojunction diode was formed by depositing ITO and IZO thin films on the vertically aligned SiNW arrays. The structural and electrical properties of the resulting ITO/IZO/SiNW heterojunction...

We report on the use of combined heating and pulsed UV light activation of indium oxide gas sensors for enhancing their performance in the detection of nitrogen dioxide in air. Indium oxide nano-octahedra were synthesized at high temperature (900 °C) via vapour-phase transport and screen-printed onto alumina transducers that comprised interdigitated electrodes and a heating resistor. Compared t...

Aron Walsh,1,* Alexey A. Sokol,2 and C. Richard A. Catlow2 1Centre for Sustainable Chemical Technologies and Department of Chemistry, University of Bath, Claverton Down, Bath BA2 7AY, United Kingdom 2University College London, Kathleen Lonsdale Materials Chemistry, Department of Chemistry, 20 Gordon Street, London WC1H 0AJ, United Kingdom (Received 5 November 2010; revised manuscript received 2...

Changes in information-technology outsourcing (ITO) are often challenging. Critical to success is integrating knowledge efficiently between the client and vendor. Some of these changes are novel and unpredictable, “stormy” events where past knowledge offers little guidance, and existing practices lose value. Improvisation has been suggested as a complementary means for such situations. However,...

Indium-doped ZnO nanowires have been prepared by vapor transport deposition. With increasing In content, the growth orientation of the nanowires switches from [101_0] to infrequent [022_3] and the surface becomes rough. No surface-related exciton emission is observed in these nanowires. The results indicate that large surface-to-volume ratio, high free electron concentration, and low density of...

Oblique-angle deposition of indium tin oxide (ITO) is used to fabricate optical thin-film coatings with a porous, columnar nanostructure. Indium tin oxide is a material that is widely used in industrial applications because it is both optically transparent and electrically conductive. The ITO coatings are fabricated, using electron-beam evaporation, with a range of deposition angles between 0 d...

In this work, zinc indium tin oxide layers with different compositions are used as the active layer of thin film transistors. This multicomponent transparent conductive oxide is gaining great interest due to its reduced content of the scarce indium element. Experimental data indicate that the incorporation of zinc promotes the creation of oxygen vacancies. In thin-film transistors this effect l...