نتایج جستجو برای: humidity sensor ag cu

تعداد نتایج: 311258  

2010
Z. Y. Chen D. Liang G. Ma G. S. Frankel H. C. Allen R. G. Kelly

The corrosion of Ag in an atmosphere of ozone and humidity with or without irradiation by ultraviolet (UV) light was investigated. A modified coulometric reduction technique was used, substituting sulphate solution for chloride solution, to prevent the spontaneous transformation of silver oxide corrosion product to chloride in the reduction solution. The presence of both ozone and UV radiation ...

2012
Che-Wei Huang Yu-Jie Huang Shey-Shi Lu Chih-Ting Lin

A fully integrated humidity sensor chip was designed, implemented, and tested. Utilizing the micro-stamping technology, the pseudo-3D sensor system-on-chip (SSoC) architecture can be implemented by stacking sensing materials directly on the top of a CMOS-fabricated chip. The fabricated sensor system-on-chip (2.28 mm × 2.48 mm) integrated a humidity sensor, an interface circuit, a digital contro...

2016
Shuangxi Zhou Fangming Deng Lehua Yu Bing Li Xiang Wu Baiqiang Yin

This paper presents a passive wireless humidity sensor for concrete monitoring. After discussing the transmission of electromagnetic wave in concrete, a novel architecture of wireless humidity sensor, based on Ultra-High Frequency (UHF) Radio Frequency Identification (RFID) technology, is proposed for low-power application. The humidity sensor utilizes the top metal layer to form the interdigit...

Journal: :Metallography, Microstructure, and Analysis 2021

The oxy-acetylene torch brazing of copper tubes using silver-based filler metals (Ag-Cu-Zn-Cd) was investigated in this study. Filler containing silver content 15% and 35%, designated by BR15 BR35, were used to assess the influence microstructure mechanical performance brazed joints. joints analyzed means optical microscopy, scanning electron energy-dispersive spectroscopy. microstructures BR35...

Journal: :journal of physical & theoretical chemistry 2007
m. aghaie m. h. fekri m. giahi e. baghdar s. farhadi

in order to study the cu(ii) ion selective electrode, an optimized membrane was prepared by mixing of 30 mg of pvc powdered, 5 mg of considered ionophore, 60 mg of plasticizer and 5 mg of additive. the sensor showed a near nernstian response for cu(ii) ions over a concentration range from 1.0×0-6 –1.0×0-2 m with a slope of 28.90.5 mv per concentration decade with a working ph range of 3.5-6.3. ...

Journal: :Physical review letters 2008
Nathan Brahms Bonna Newman Cort Johnson Tom Greytak Daniel Kleppner John Doyle

We have trapped large numbers of copper (Cu) and silver (Ag) atoms using buffer-gas cooling. Up to 3 x 10{12} Cu atoms and 4 x 10{13} Ag atoms are trapped. Lifetimes are as long as 5 s, limited by collisions with the buffer gas. Ratios of elastic to inelastic collision rates with He are >or=10{6}, suggesting Cu and Ag are favorable for use in ultracold applications. The temperature dependence o...

Journal: :Inorganic chemistry 2003
Mohammad A Omary Manal A Rawashdeh-Omary Himashinie V K Diyabalanage H V Rasika Dias

The synthesis, structure, and photoluminescence properties are described for the three-coordinate mononuclear and dinuclear complexes [H(2)B(3,5-(CF(3))(2)Pz)(2)]M(2,4,6-collidine), M(1)(), and [[3,5-(CF(3))(2)Pz]M(2,4,6-collidine)](2), M(2)(), respectively (M = Cu; Ag). The solids exhibit bright blue phosphorescence, at room temperature for the copper compounds and at 77 K for all compounds. A...

Alinaghian, H. R. , Monir Vaghefi, S. M., Sadough Vanini, S. A. ,

The surface of continuous casting moulds with high number of castings may be worn or destructed. As result, an approach for increasing these moulds life is necessary. In this project, the goal is the restoration of the DHP copper sample. In this project, the destruction of the copper sample is done by creation of groove using a CNC machine. The restoration of the sample is done using OAW and fi...

Alinaghian, H. R. , Monir Vaghefi, S. M., Sadough Vanini, S. A. ,

The surface of continuous casting moulds with high number of castings may be worn or destructed. As result, an approach for increasing these moulds life is necessary. In this project, the goal is the restoration of the DHP copper sample. In this project, the destruction of the copper sample is done by creation of groove using a CNC machine. The restoration of the sample is done using OAW and fi...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید