In order to improve the sensing properties of tin dioxide gas sensor, four kinds of different SiO₂/Al₂O₃ ratio, different particle size of MFI type zeolites (ZSM-5) were coated on the SnO₂ to prepared zeolite modified gas sensors, and the gas sensing properties were tested. The measurement results showed that the response values of ZSM-5 zeolite (SiO₂/Al₂O₃ = 70, grain size 300 nm) coated SnO₂ ...

The carbon nanotube (CNT) film is used to fabricate the novel carbon nanotube film cathode (CNTFC) gas sensor, and the working voltage of the novel sensor at atmospheric pressure decreases to several hundred volts from the value of more than thousand volts of the traditional discharge gas sensor, however it is limited by that the space charge in the gap is very hard to diffuse after the breakdo...

double layer zno/sno2 thin film resistive gas sensors were fabricated by successive pvd of those oxides onto porcelain substrates. the metallic contacts were provided by electron beam evaporation of platinum onto substrates prior to deposition of the gas sensitive layers. deposits were thermally annealed at different temperatures. it was shown that the activation energy of electrical conduction...

The fabrication of electronic devices, such as gas sensors on flexible polymer substrates, enables the use of electronics in applications where conventional devices on stiff substrates could not be used. We demonstrate the development of a new intra-tube electronic-nose (e-nose) gas sensor device with multiple sensors fabricated and integrated on a flexible substrate. For this purpose, we devel...

A general bottom-up modeling strategy for gas sensor response to CO, O(2), H(2)O, and related mixtures exposure is demonstrated. In a first stage, we present first principles calculations that aimed at giving an unprecedented review of basic chemical mechanisms taking place at the sensor surface. Then, simulations of an operating gas sensor are performed via a mesoscopic model derived from calc...

the paper presents fabrication and characterization of a Quartz Crystal Microbalance based gas sensor with a diamond powder sensitive layer deposited using the ink-jet printing technique. The sensor was exposed to a low concentration of ammonia, acetone vapors and different levels of humidity. Impedance characteristics close to the natural resonant frequency of 10 MHz were examined. The sensor ...

This paper introduces a fuzzy sensor validation and fusion methodology and applies it to sensor data from a gas turbine power plant. The FUSVAF (Fuzzy Sensor Validation and Fusion) algorithm tackles two problems: (1) It filters out noise from measurements provided as input to a gas turbine controller to maximize power plant performance. (2) It compensates for sensor failure to allow the power p...

It was found, that Metal Insulator Semiconductor Field Effect (MIS-FE) sensors with structures Pd-Si3N4-SiO2-Si and Pd-Ta2O5SiO2-Si have sufficient concentration resolution to H2S gas and acceptable response time in mixture of H2S gas with air. Results of MIS-FE gas sensor operation in periodic regime are presented and allow us to be sure, that low detection level of H2S for MISFE sensor with T...

Car cabin air quality monitoring can effectively he analysed using metal oxide semiconducting (MOS) gas sensors. In this paper, commercially available gas sensors are compared with fabricated Mo03-Ti02 and Moo3WO3 thin films. The laboratory tests showed that the Moo3 based sensors possessed comparable gas sensing properties. The Mo03(75%)-Ti02(25%) sensor has a response 74% higher relative to t...

Nowadays, the semiconductor nanowires (NWs) typically used in hydrogen gas sensors. Gallium nitride (GaN) with a wide band gap of 3.4 eV, is one of the best semiconductors for this function. NWs surface roughness have important role in gas sensors performance. In this research, GaN NWs have been synthesized on Si substrate by plasma-assisted vapor phase deposition at different deposition time, ...