fast fracture is one of the major failure modes in brittle polymers. generally, crack growth in these polymers may occur under combined tensile-shear loading. however, the fracture test data reported previously for some dental restorative resins can not be predicted by using the available fracture criteria.in this paper, a modified fracture criterion is used for estimating the fracture load for...

This research work presents the study on fracture behavior of Al6061 with graphite particulate composite produced by the stir casting technique. The materials selected for the proposed work is Al6061 and graphite particles. Compact tension (CT) specimens were utilized to determine fracture toughness for different thickness of composite. In the present work, optimizing the parameters of the comp...

The fracture toughness of three new compositional variants of the Zr-Ti-Be-LTM (Late Transition Metal) family of bulk metallic glasses (BMG’s) are studied in the as-cast and annealed condition. Quaternary Zr-Ti-Cu-Be alloys consistently had linear elastic fracture toughness values greater than 80 MPa·m, while Vitreloy 1, a Zr-Ti-Cu-Ni-Be alloy, had an average fracture toughness of 48.5 MPa·m wi...

The age-related deterioration in the quality (e.g., strength and fracture resistance) and quantity (e.g., bone-mineral density) of human bone, together with increased life expectancy, is responsible for increasing incidence of bone fracture in the elderly. The present study describes ex vivo fracture experiments to quantitatively assess the effect of aging on the fracture toughness properties o...

Mechanical alloying and vacuum sintering have been used to produce bulk nanostructured Ti5Si3 and Ti5Si3-15Wt.% Al2O3 nanocomposite. X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) were used to study the microstructural characteristics of the samples. Indentation method was used to calculate hardness, elastic modulus and fracture toughness ...

EFFECTS OF RUBBER ADDITIVES ON PROPERTIES OF ASPHALTIC MATERIALS by JOHN ALBERT ALEXANDER Submitted to the Department of Civil Engineering on August 17, 1968, in partial fulfillment of the requirements for the degree of Master of Science in Civil Engineering. This study investigated the modification of asphalt with various rubbers and the effect of this modification on the values of fracture to...

Failures in composite materials occur mainly due to interlaminar fracture, also called delamination, between laminates. This indicates that characterizing interlaminar fracture toughness is the most effective factor in the fracture of composite materials. This study reports investigation on mixed-mode interlaminar fracture behaviour in woven carbon fibre/polyetherimide (CF/PEI) thermoplastic co...

Results of experimental investigation carried out to study the effects of addition of natural san fibres on the fracture toughness and impact strength of high-volume fly ash concrete are presented in this paper. San fibres belong to the category of ‘Natural Bast Fibres’, also known as ‘Sunn Hemp’. Its scientific (botanical) name is Crotalaria Juncea. It is mostly grown in the Indian Sub-Contine...

Fracture toughness resistance curves describe a material's resistance against crack propagation. These curves are often used to characterize biomaterials like bone, nacre or dentin as these materials commonly exhibit a pronounced increase in fracture toughness with crack extension due to co-acting mechanisms such as crack bridging, crack deflection and microcracking. The knowledge of appropriat...