Using laboratory assays, we tested whether the secondary metabolites (furanones) on the surface of the red alga Delisea pulchra deter the settlement and growth of a range of ecologically relevant fouling organisms. D. pulchra and 4 other co-occurring seaweeds were almost exclusively fouled by other algae. Consequently, we carried out laboratory assays using propagules from 4 fouling algae (Ulva...

Seasonal variations in the fouling diatom community from a monsoon influenced tropical estuary were investigated. The community composition did not differ significantly between stainless steel and polystyrene substrata due to dominance by Navicula spp. The experimental evidence suggests that Amphora, which is a dominant fouling diatom in temperate waters, ultimately dominates the community in t...

This experimental work investigated the property of membrane fouling for different sludges at high flux 20 L/(m(2)h). The MBR with good aerobic granular sludge performed the longest operation time 61 days, and TMP rose up in a steady overall rate, while only 10, 14 and 19 days for bulking, flocculent and small granular sludge, respectively, which clearly demonstrated the good and complete aerob...

The results of experiments on municipal wastewater primary effluent are presented for a pilot-scale submerged membrane bioreactor (SMBR). The SMBR pilot plant employed an ultrafiltration membrane with a nominal pore size of 0.035 microm and was operated at a constant membrane flux of 30 L/m(2)h. The mixed liquor suspended solids (MLSS) concentration was maintained at 8+/-2 g/L and steady-state ...

Silicon and silicon-based materials are essential to our daily life. They are widely used in healthcare and manufacturing. However, silicon and silicon-based materials are susceptible to bio-fouling, which is of great concern in numerous applications. To date, interdisciplinary research in surface science, polymer science, biology, and engineering has led to the implementation of antifouling st...

A mathematical model was developed for combined fouling due to biofilms and mineral precipitates in membrane feed channels with spacers. Finite element simulation of flow and solute transport in two-dimensional geometries was coupled with a particle-based approach for the development of a composite (cells and crystals) foulant layer. Three fouling scenarios were compared: biofouling only, scali...

Organic conditioning films have been shown to alter properties of surfaces, such as hydrophobicity and surface free energy. Furthermore, initial bacterial adhesion has been shown to depend on the conditioning film surface properties as opposed to the properties of the virgin surface. For the particular case of nanofiltration membranes under permeate flux conditions, however, the conditioning fi...

The goal of this study is to investigate the effect of inoculating granules on reducing membrane fouling. In order to evaluate the differences in performance between flocculent sludge and aerobic granular sludge in membrane reactors (MBRs), two reactors were run in parallel and various parameters related to membrane fouling were measured. The results indicated that specific resistance to the fo...

Membrane bioreactors (MBRs) are now main stream wastewater treatment technologies. In recent times, novel pressure driven rotating membrane disc modules have been specially developed that induce high shear on the membrane surface, thereby reducing fouling. Previous research has produced dead-end filtration fouling model which combines all three classical mechanisms that was later used by anothe...

The primary role of antifouling precautions on ship hulls is to avoid the tremendous increase in drag resistance caused by the settlement of fouling species. In this chapter, basic hydrodynamic concepts needed to fully understand the effect of fouling species on the propulsion requirements of a ship will be introduced. Subsequently, studies on the drag resistance associated with various coating...