Existing underground pipe jacking methods use a reinforcing rod in a steel tube to obtain structural stiffness. However, some problems such as inconvenience of works and expensive materials resulted from limited working space and reinforcing works are existed. To resolve these problems, a new pipe jacking method, namely PST (Prestressed Segment Tunnel) method, was developed which used joint to ...

The authors of this experimental research work have made an attempt to experimentally investigate the ultimate flexural load of ferrocement slabs of size 700mm. X 200mm. X 15mm. (thickness) reinforced with PVC coated steel weld mesh, and compare the results with slabs using GI-coated steel weld mesh, by varying the number of layers from 1-3. Ordinary Portland Cement, locally available river san...

Crossover of the dispersion of flexural waves recorded in borehole cross-dipole measurements is interpreted as an indicator of stress-induced anisotropy around a circular borehole in formations that are isotropic in the absence of stresses. We have investigated different factors that influence flexural wave dispersion. Through numerical modeling, we determined that for a circular borehole surro...

UNLABELLED Polymethyl methacrylate (PMMA) resins have commonly been used as a denture base material. However, denture bases may act as a reservoir for microorganisms and contribute to oral diseases in denture wearers. It is hypothesized that the 2-tert-butylaminoethyl methacrylate (TBAEMA) incorporated to acrylic resins should have antimicrobial activity related to the presence of amino groups ...

UNLABELLED Advances in all-ceramic systems have established predictable means of providing metal-free aesthetic and biocompatible materials. These materials must have sufficient strength to be a practical treatment alternative for the fabrication of crowns and fixed partial dentures. OBJECTIVES The aim of this study was to compare the biaxial flexural strength of three core ceramic materials....

The plate of a pultruded fiber-reinforced polymer or fiber-reinforced plastic (FRP) profile produced via a pultrusion process is likely to undergo local buckling and cracking along the fiber direction under an external load. In this study, we constructed a pultruded glass-fiber-reinforced polymer-light wood composite (PGWC) profile to explore its mechanical performance. A rectangular cross-sect...

ABSTRACT: Several reinforced concrete deep beams with different L/D ratios (1.5, 1.6, 1.71) were cast and tested in order to investigate the strain distribution pattern at mid-section of the beam. This paper describes analysis of deep beams subjected to two point loading with three different L/D ratios (1.5, 1.6, 1.71) using Non-linear Finite element method (ANSYS 9.0 software). In ANSYS 9.0 so...

Three methods for analyzing azimuthal anisotropy from cross-dipole logs are applied to data from the Powder River Basin in Wyoming. These techniques are based on the phenomena of flexural wave splitting in anisotropic materials and are analogous to the techniques used for VSP data processing. The four-component cross-dipole logging data obtained with a Schumberger tool from a vertically-fractur...

The aim of the study was to investigate the flexural and impact strength of 3 commercially available denture base resins after reinforcing them with single walled carbon nanotubes (SWCNT’S). Each acrylic resin was first solubilised in Tetrahydrofuran (THF) and then carbon nanotubes were added in different percentages respectively. A total of 50 specimens were made from each material (Eclipse, T...

Existing underground pipe jacking methods use a reinforcing rod in a steel tube to obtain structural stiffness. However, some problems such as inconvenience of works and expensive materials resulted from limited working space and reinforcing works are existed. To resolve these problems, a new pipe jacking method, namely PST (Prestressed Segment Tunnel) method, was developed which used joint to ...