7 Corrosion of reinforcing steel in concrete can alter the interface between the steel and concrete and 8 thus affects the bond mechanism. This subsequently influences the behaviour of reinforced 9 concrete structures in terms of their safety and serviceability. The present paper attempts to 10 develop a numerical method that can simulate the behaviour of reinforced concrete walls subjected 11 ...

The performance of the interface between fiber reinforced polymer (FRP) composites and concrete is one of the key factors affecting the behavior of strengthened reinforced concrete (RC) structures. Existing laboratory research has shown that RC beams strengthened with FRP sheets usually fail because of either debonding of the impregnated fabric from the concrete substrate or fracture of the FRP...

In this paper, the bi-directional evolutionary structural optimization (BESO) method is used to find optimal layouts of 3D prestressed concrete beams. Considering the element sensitivity number as the design variable, the mathematical formulation of topology optimization is developed based on the ABAQUS finite element software package. The surface-to-surface contact with a small sliding between...

The ability to perform accurate nonlinear simulations is a key component in the assessment of the behavior of seismic force resisting systems. A three-dimensional distributed plasticity formulation for composite beam-columns suitable for nonlinear static and dynamic analyses of composite seismic force resisting systems has been developed. New uniaxial constitutive relations are developed for th...

experiments were carried out to observe the influence of loading type on concrete beam specimens. beam specimens made of similar concrete mixture with the same geometry were tested under three point static loading and low velocity drop weight impact loading. load – displacement behavior, absorbed energy dissipation capacity, stiffnesses, failure modes of beam specimens were obtained and discuss...

The use of Fiber Reinforced Polymer (FRP) reinforcement is a practical alternative to conventional steel rebars in concrete structures subjected to aggressive environments. The solution is attractive for bridge deck and rail applications, as it eliminates corrosion of the steel reinforcement, which is the major instrument of degradation. Due to the peculiar physical and mechanical characteristi...

A unified and comprehensive treatment of shape sensitivity that includes variations in the nodal coordinates, member cross-section properties, and global shape parameters of inelastic frame structures is presented. A novelty is the consideration of geometric uncertainty in both the displacementand force-based finite element formulations of nonlinear beam-column behavior. The shape sensitivity e...

ABSTRACT: This paper describes analysis of deep beams subjected to two point loading with three different L/D ratios (1.5, 1.6, 1.71) using Non-linear Finite element method (ANSYS 9.0 software) in order to investigate the stress and strain distribution pattern at mid-section of the beam. In ANSYS 9.0 software, SOLID 65 and LINK 8 element represent concrete and reinforcing steel bars. Non-linear...

We present a mixed-integer nonlinear programming (MINLP) formulation to achieve minimum-cost designs for reinforced concrete (RC) structures that satisfy building code requirements. The objective function includes material and labor costs for concrete, steel reinforcing bars, and formwork according to typical contractor methods. Restrictions enforce correct geometry of the cross-section dimensi...