نتایج جستجو برای: explosive cladding

تعداد نتایج: 16303  

2009
Yu. A. Vlasov S. J. McNab

We investigate both experimentally and theoretically the waveguiding properties of a novel double trench waveguide where a conventional single-mode strip waveguide is embedded in a two dimensional photonic crystal (PhC) slab formed in silicon on insulator (SOI) wafers. We demonstrate that the bandwidth for relatively low-loss (50dB/cm) waveguiding is significantly expanded to 250nm covering alm...

2010
X. Q. SUN C. M. CHEN F. WANG J. SUN W. N. GAO L. GAO H. L. ZHENG C. P. KANG D. M. ZHANG

A polymer-silica hybrid 2×2 thermo-optic switch is demonstrated. The top cladding and core layer are composed of polymers, while the bottom cladding is made of silica. Since polymer and silica have opposite signs of thermo-optic coefficients, the change of the refractive index of the core is opposite to that of the bottom cladding as the temperature increased. With the finite difference beam pr...

Journal: :Optics letters 2014
Bobo Gu Wenliang Qi Jie Zheng Yanyan Zhou Perry Ping Shum Feng Luan

A simple and compact reflective refractometer based on a tilted fiber Bragg grating (TFBG) inscribed in an ultra-high photon-sensitive thin-core fiber is proposed and experimentally demonstrated. The reflective refractometer utilizes a short piece of thin-core fiber containing one TFBG to ensure the recoupling of cladding modes. The reflection spectra occur in two well-defined wavelength bands ...

Journal: :Optics express 2016
Md Selim Habib Ole Bang Morten Bache

A hollow-core fiber using anisotropic anti-resonant tubes in the cladding is proposed for low loss and effectively single-mode guidance. We show that the loss performance and higher-order mode suppression is significantly improved by using symmetrically distributed anisotropic anti-resonant tubes in the cladding, elongated in the radial direction, when compared to using isotropic, i.e. circular...

2009
Johan Nilsson Shaif-Ul Alam Jose A. Alvarez-Chavez Paul W. Turner W. Andrew Clarkson Anatoly B. Grudinin

We describe erbium-ytterbium co-doped fiber lasers in different free-running and tunable configurations. The lasers were cladding-pumped by high-power multimode diode sources. We compare pumping at 915 and 980 nm. With a free-running laser, we obtained slope efficiencies of up to 50% with 915-nm pumping and 38% with 980-nm pumping, with respect to absorbed pump power. We reached a double-ended ...

Journal: :Optics express 2011
Sze-Chun Chan Qing Liu Zhu Wang Kin Seng Chiang

A tunable negative-tap photonic microwave filter using a cladding-mode coupler together with optical injection locking of large wavelength detuning is demonstrated. Continuous and precise tunability of the filter is realized by physically sliding a pair of bare fibers inside the cladding-mode coupler. Signal inversion for the negative tap is achieved by optical injection locking of a single-mod...

2017
Z. L. Bushell M. Florescu S. J. Sweeney

Photonic crystal cavities enable the realization of high Q-factor and low mode-volume resonators, with typical architectures consisting of a thin suspended periodically-patterned layer to maximize confinement of light by strong index guiding. We investigate a heterostructure-based approach comprising a high refractive index core and lower refractive index cladding layers. Whilst confinement typ...

2005
Lajos Matus

During loss-of-coolant (LOCA) accidents the primary reactor coolant system shall be maintained in a safe state so that the coolability of fuel rods was maintained and the emergency core cooling criteria must be met. These criteria were accepted originally for Western design reactors and the same criteria were applied in Hungary to the Paks NPP as well. However the WER type reactor has different...

Journal: :Journal of the Japan Welding Society 1995

Journal: :Optics letters 2013
Tuan Guo Libin Shang Fu Liu Chuang Wu Bai-Ou Guan Hwa-Yaw Tam Jacques Albert

A fiber-optic vector vibroscope based on orthogonal polarization cladding-to-core recoupling is demonstrated. A compact structure in which a short section of polarization-maintained (PM) fiber stub containing a straight fiber Bragg grating (FBG) is spliced to another single-mode fiber. Two well-defined orthogonally polarized cladding modes reflected by the PM-FBG are recoupled at the junction a...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید