This paper describes an innovative alternative to manual procedures for the application of carbon fiber and resin injection in concrete surfaces in tunnels. It is based on a specially designed light-weight integrated tool for automatic application of Fiber Reinforced Polymer (FRP) and epoxy resin injection. Vision and laser telemeter sensing are integrated into the tool to assure precise inspec...

The effect of the die materials on the fracture strength of CAD/CAM monolithic ceramic crowns was studied in this research. Three different types of die materials (dentin, Ni-Cr alloy, epoxy resin) were prepared. The monolithic crowns were fabricated using a CAD/CAM System; CEREC 4. The CAD/CAM crowns were cemented to dies using a resin cement. The specimens were tested under compressive load a...

an epoxy resin was modified by silica nanoparticles and cured with an anhydride. the particles with different batches of 12, 20, and 40 nm sizes were each distributed into the epoxy resin ultrasonically. electron microscopy images showed that the silica particles were well dispersed throughout the resin. tensile test results showed that young’s modulus and tensile strength increased with the vo...

Composite materials fabricated using hollow microspheres are called syntactic foams. Particulate filler composites such as syntactic foams, consisting of glass microballoons and epoxy resin, are desirable for applications that require high compressive and impact strengths and low thermal conductivities. However, for heat dissipation applications, filler additions are required to increase the th...

A novel soy-based epoxy resin system was synthesized by the process of transesterification and epoxidation of regular soy bean oil, which has the potential to be widely usable in various composite manufacturing processes. Cure kinetics and rheology are two chemical properties commonly required in process modeling. In this work, the cure kinetics and rheology of the soy-based resin system were m...

Mechanical behaviour of unsaturated polyester resin used for the composite materials has been studied to determine various important parameters, such as tensile and compressive, single edge-notch tensile fracture toughness, flexural properties and fracture energy. Fracture toughness, KIC, and fracture energy, GIC, obtained for the polyester resin lie between the typical values for epoxy resins ...

This work involves the development of a novel siliconized epoxy interpenetrating coating system using epoxy resin as base, hydroxylterminated polydimethylsiloxane (HTPDMS) as modifier, -aminopropyltriethoxysilane ( -APS) as crosslinking agent and dibutyltindilaurate (DBTDL) as catalyst. Polyamidoamine and aromatic polyamine adduct were used as curing agents for the above coating systems. The th...

objective: one of the major problems of all ceramic restorations is their probable fracture against the occlusal force. the aim of the present in-vitro study is was to compare the effect of two marginal designs (chamfer & shoulder) on the fracture resistance of zirconia copings, cercon (cad/cam). materials and methods : this in vitro study was done with single blind experimental technique. one ...

results the results showed that the epoxy plates 6 and 2 mm thick had the highest and the lowest averages of shielding effectiveness at 4.48 db and 1.90 db, respectively. however, increasing the thickness was useful up to 4 mm. in addition, in a similar attenuation pattern, x-band frequency was divided into lower, middle, and upper sections. the lower section had the highest shielding effective...