Two rapid and simple methods have been developed for determining the approximate cooling rates of iron and stony-iron meteorites in which kamacite formed by diffusion-controlled growth along planar fronts. The first method requires only measurements of the mean kamacite bandwidth and the bulk nickel content. The second method requires the determination of the nickel composition near the taenite...

Compositions with tie lines between the and ( ; ) phases in a ternary Re-Cr-Ni system were investigated by heat treating various ternary Re-Cr-Ni alloys at 1573K in vacuum for up to 2000 h. The microstructures of the Re-containing alloys that had been water quenched after various heat treatment for times were observed and their concentration profiles for Re, Cr, and Ni were measured using an el...

Electron-probe x-ray micro analysis (EPMA) and particle-induced x-ray emission analysis (PIXE) were performed under grazing-exit conditions. To control the exit angle (take-off angle), a new sample holder having a stepping motor was developed for grazing-exit EPMA. A carefully polished surface of a stainless-steal sample was measured. The surface of stainless steel is normally covered with a th...

Recently reported cardiovascular outcome studies on empagliflozin (EMPA-REG) and liraglutide (LEADER) have spurred interest in this field of diabetology. This commentary compares and contrasts these studies with two equally important outcome trials conducted using blood pressure lowering agents. A comparison with MICROHOPE (using ramipril) and ADVANCE (using perindopril + indapamide) blood pres...

Interest in the use of EPMA at low voltage has grown considerably in recent years, mainly because of the availability of electron-beam instruments equipped with field-emission guns. However, EPMA at low voltage is marred by both experimental and analytical problems which may affect the accuracy of quantitative results. In the case of the analysis of transition elements, both the emission and ab...

Age-hardening characteristics in a dental low-gold alloy composed of 40.0 wt% Au-35.0 wt% Ag-7.9 wt% Pd-7.0 wt% Cu-5.0 wt% In-3.5 wt% Zn-1.5 wt% Sn, were investigated by means of the hardness test, XRD study, SEM observations and EPMA. The following results were obtained. The age-hardening was characterized by a precipitation of Cu-rich alpha2 phase in the a phase. The softening that occurred f...

Octahedrally-coordinated Cr(3+) possesses peculiar spectral features which made easy to identify it in minerals, even in minor amounts. Chromium has been studied in uvarovite and fuchsite by optical and EPR spectra. Optical, EPR, FT-infrared and EPMA studies have also let to determine the presence of Fe(3+) and Ti(3+) and fluid inclusions within uvarovite and fuchsite. Absorption and scattering...

The segregation of Alloy 718 ingots and the technical factors which affect the ingot homogenization practice are studied in this paper. The segregation and melting point of Alloy 7 18 ingots are studied by DTA, electron microprobe and structure analysis. The elimination of Laves phase is studied in detail. After the solution of Iaves phase the segregation elimination of Nb is reviewed further. ...

Chemical fingerprinting using major or trace element composition is used to characterize the Mediterranean island sources of obsidian and can even differentiate as many as nine flows in the Monte Arci region of Sardinia. Analysis of significant numbers of obsidian artifacts from Neolithic sites in the central Mediterranean reveals specific patterns of source exploitation and suggests particular...