Metallurgical slag, including ferrochrome slag is internationally recognized as suitable material for use in road construction and as aggregate for concrete (Rossouw et al. 1981, Lind et al. 2001). Contrary to international practice, metallurgical slag – including ferrochrome slagis classified as hazardous waste that must be de-listed before use in other applications (DWAF 1998). Having adopted...

The shortage of waste landfill space for waste disposal and the high demand for fill materials for land reclamation projects in Singapore have prompted a study on the feasibility of using spent copper slag as fill material in land reclamation. The physical and geotechnical properties of the spent copper slag were first assessed by laboratory tests, including hydraulic conductivity and shear str...

Experiments have been conducted to study the effect of addition of fly ash, copper slag, and steel and polypropylene fibres on compressive strength of concrete and to determine the hierarchical order of influence of the mix variables in affecting the strength using cluster analysis experimentally. While fly ash and copper slag are used for partial replacement of cement and fine aggregate, respe...

Batch experiments were conducted to evaluate the ability of steel slag in removing manganese from aqueous solution. Several variables had been setup to evaluate the performance of steel slag to remove manganese from aqueous solution in different experimental condition. The variables include contact time, size, dosage, pH and initial concentration of manganese. The equilibrium contact time was a...

Microstructural and mechanical properties of alkali activated binders based on blends of Colombian granulated blast furnace slag (GBFS) and fly ash (FA) were investigated. The synthesis of alkali activated binders was conducted at 85 °C for 24 h with different slag/fly ash ratios (100:0, 80:20, 60:40, 40:60, 20:80, and 0:100). Mineralogical and microstructural characterization was carried out b...

The viscosity of slag and the thermal conductivity of ash deposits are among two of the most important constitutive parameters that need to be studied. The accurate formulation or representations of the (transport) properties of coal present a special challenge of modeling efforts in computational fluid dynamics applications. Studies have indicated that slag viscosity must be within a certain r...

Peat normally has high organic matter content and is generally associated with high compressibility and high magnitude and rates of creep. It may also be associated with poor strength characteristics and a risk of large deformation. The main specifications in the peat nature are the presence of acidic or less commonly alkaline media, combined with a high level of ground water. One of the most c...

In this paper we will investigate torus actions on complete manifolds with calibrations. For Calabi-Yau manifolds M with a Hamiltonian structure-preserving k-torus action we show that any symplectic reduction has a natural holomorphic volume form. Moreover Special Lagrangian (SLag) submanifolds of the reduction lift to SLag submanifolds of M , invariant under the torus action. If k = n− 1 and H...

In recent years, there have been many attempts to reuse molten slag. Molten slag is obtained through further treatment of incinerated ash produced in the disposal process of garbage or sewage sludge and is used in building materials, such as brick. To establish the safety of such slag, its physical properties and metal contents were investigated in this study. After examining the physical and c...

In the conventional continuous casting of steel, either mold powder or oil can be added to lubricate the mold from sticking to the solidifying steel shell. The mold powder melts to form a molten slag or flux layer, and also acts to protect the molten steel from oxidation, to insulate the molten steel from heat loss, to absorb inclusions from the molten steel, to regulate heat transfer to mold w...