in this search drying characteristics of green pea (pisum satium) with an initial moisture content of 76% (db) was studied in a fluidized bed dryer assisted by microwave heating. four drying air temperatures (30, 40, 50 and 60ºc) and five microwave powers (180, 360, 540, 720 and 900w) were adopted. at each drying operating conditions the volume of green pea was calculated by measuring the three...

In response to the continuously advancing concrete technology, a new prediction model for creep and shrinkage is presented. This model, named B4, builds on the theoretically justified model B3, which is a RILEM recommendation from 1996. Improvements to the model allow for enhanced multi-decade prediction, distinguish between the drying and autogenous shrinkage, and introduce new equations and p...

The mechanism responsible for unusual mechanical properties of tension wood gelatinous fiber (Gfiber) was investigated. We discussed origins of high tensile growth stress, high drying shrinkage, and rapid increase of Young’s modulus due to drying, in association with microscopic structure of gelatinous layer (G-layer). Anatomical, crystallographic, and micromechanical approaches were employed. ...

Abstract In this research, the effect of different parameters a convective hot air dryer on mass transfer coefficients thin‐sliced pears in drying stages is analytically and experimentally investigated. According to results, first stage which begins from initial moisture content (MC) 87–57% study, heat coefficient, inlet temperature MC product had highest influence rate product. second (from 57...

The lack of durability in concrete repairs induces repair failures in field and endless “repair of repairs”. Most often drying shrinkage of “new” repair material restrained by “old” concrete substrate causes cracking in the repair material, combined with interface delamination between the repair and the concrete substrate, which may also introduce chlorides, oxygen, moisture, alkali or sulphate...

Because most shrinkage-reducing admixtures (SRAs) significantly reduce the surface tension of a cement paste pore solution, they will naturally influence all physical properties and processes that are dependent in some way on surface tension. Such properties include internal relative humidity, capillary stresses, and freezing point depression, all via the Kelvin equation and its variants (Kelvi...

A new class of organic-inorganic hybrid aerogels having small pores and narrow pore size distribution are synthesized from well-dispersed clay platelets in water as base catalyst. Clay-catalyzed organic gels have strong advantage in controlling nanopore structure as well as reducing drying shrinkage by reinforcing the organic network with inorganic platelets.

This paper reports a method to integrate silica aerogels monolithically in microfluidic chips. Silica Aerogel is a highly porous bulk material. The gel was synthesized from tetraethyl orthosilicate by a sol-gel process. Polyethylene glycol and an extended aging period were used to strengthen the matrix minimizing gel shrinkage. This technique allows alcogel structures with high strength and sti...