Anodizing process is largely performed on aluminum alloys to enhance corrosion and wear resistances. However, this can significantly reduce the fatigue resistance of depending alloy parameters. This paper deals with influence anodizing aeronautical 2618-T851. The anodic film has been characterized after each step using scanning electron microscopy (SEM). analysis showed that layer was crazed ju...

Self-organized porous anodic alumina (PAA) formed by electrochemical anodization have become a fundamental tool to develop various functional nanomaterials. However, it is still a great challenge to break the interpore distance (Dint) limit (500 nm) by using current anodization technologies of mild anodization (MA) and hard anodization (HA). Here, we reported a new anodization mode named "Janus...

A simple method for penetrating the barrier layer of an anodic aluminum oxide (AAO) film and for detaching the AAO film from residual Al foil was developed by reversing the bias voltage in situ after the anodization process is completed. With this technique, we have been able to obtain large pieces of free-standing AAO membranes with regular pore sizes of sub-10 nm. By combining Ar ion milling ...

Two different ionic liquids have been tested in the electrochemical fabrication of anodic porous alumina in an aqueous solution of oxalic acid. It was found that during galvanostatic anodization of the aluminum at a current density of 200 mA/cm2, addition of 0.5% relative volume concentration of 1-butyl-3-methylimidazolium tetrafluoborate resulted in a three-fold increase of the growth rate, as...

Thin films of porous anodic aluminum oxide (AAO) on tin-doped indium oxide (ITO) substrates were fabricated through evaporation of a 1,000- to 2,000-nm-thick Al, followed by anodization with different durations, electrolytes, and pore widening. A faster method to obtain AAO on ITO substrates has been developed, which with 2.5 vol.% phosphoric acid at a voltage of 195 V at 269 K. It was found th...

In the past decades, a variety of self-aligned functional oxides have successfully been grown on a wide range of metals using electrochemical, self-organizing anodization. The earliest reports on highly ordered oxide structures included porous aluminum oxide layers grown by optimized anodization of Al in oxalic acid. These nanoporous oxides found a considerable number of direct applications, su...

In this paper, we characterized aluminum/sapphire interface structure by using high-resolution transmission electron microscopy. It was found that step structures of sapphire formed at the aluminum/sapphire interfaces during the liquid-phase bonding. It was discovered that the addition of silicon in aluminum significantly reduces the step growth at the interface. Silicon was found to segregate ...

In this paper atom probe tomography is used to explore early stage clustering in aluminum alloys. Two novel concepts for a modi cation of clustering are discussed. Control of early stage clustering is welcome from an application point of view since clustering deteriorates strength evolution during the industrial heat treatment of the important class of Al Mg Si precipitation-hardenable alloys. ...