Three types of inexpensive Pb-free solder joints, namely Zn-based and Bi-based solders, and a CuSn alloy were studied for application to the high-temperature operation of wide band-gap power semiconductor devices using GaN or SiC. Zn– Al solder sheets, whose melting point is 380°C were prepared, and then surface oxides were removed by RF plasma etching. Subsequently, Cu thin films were deposite...

Solution-processed approach for the deposition of Cu2ZnSn (S,Se)4 (CZTSSe) absorbing layer offers a route for fabricating thin film solar cell that is appealing because of simplified and low-cost manufacturing, large-area coverage, and better compatibility with flexible substrates. In this work, we present a simple solution-based approach for simultaneously dissolving the low-cost elemental Cu,...

We have studied sputter-deposited Ta, Ta s6 ‘t4, and Ta3&ir4N~e thin lilms as diffusion Sr barriers between Cu overlayers and Si substrates. Electrical measurements on Si n +p shallow junction diodes demonstrate that a 180-nm-thick Ta film is not an effective diffusion barrier. For the standard test of 30-min annealing in vacuum applied in the present study, the Ta barrier fails after annealing...

Ag/TiO2 thin films were prepared using the sol-gel spin coating method. The microstructural growth behaviors of elucidated real-time synchrotron radiation imaging, its structure was determined grazing incidence X-ray diffraction (GIXRD), morphology imaged field emission scanning electron microscopy (FESEM), and surface topography examined atomic force microscope (AFM) in contact mode. cubical s...

Formation of planar heterojunction perovskite solar cells exhibiting both high efficiency and stability under continuous operation remains a challenge. Here, we show this can be achieved by using a defective TiO2 thin film as the electron transport layer. TiO2 layers with native defects are deposited by electron beam evaporation in an oxygen-deficient environment. Deep-level hole traps are intr...

TiO2 thin films have been prepared by the sol-gel dipcoating technique in order to elaborate antireflective thin films for monocrystalline silicon (mono-Si). The titanium isopropoxyde was chosen as a precursor with hydrochloric acid as a catalyser for preparing a stable solution. The optical properties have been tailored with varying the solution concentration, the withdrawn speed, and the heat...

In the present work, TiO2 nanoparticle and multi-walled carbon nanotubes composite powder is prepared hydrothermally. After doctor blading the paste from composite powder, the resulted composite film is sensitized with Cu-based metal-organic frameworks using a layer-by-layer deposition technique and the film is characterized using FE-SEM, EDX, XRD, UV/Visible spectrophotometry and photoluminesc...

A nano-grid structure of perovskite SrTiO3 NWs is developed for a novel electron transport layer in inverted polymer solar cells. Due to the excellent charge transporting properties of the SrTiO3 nano-grid structure, the device employing this nanostructure showed ∼32% enhanced photovoltaic performance, compared to the solar cell using a TiO2 thin film.