نتایج جستجو برای: copper ferrite

تعداد نتایج: 89370  

Journal: :Journal of Materials Science: Materials in Electronics 2022

Abstract Polyvinylidene fluoride (PVDF) polymer is considered as an encouraging piezoelectric material whose optical properties need to be enhanced. Zinc ferrite excellent photoelectric material, in the present work it was doped separately by (cobalt and copper) ferrite. Co-ZnFe 2 O 4 Cu-ZnFe nanoparticles were synthesized using auto-combustion method characterized XRD, FTIR, FESEM HRTEM. The c...

2017
J. F. Dawson

A new technique which allows the simulation of thin ferrite absorbing tiles in a coarse TLM mesh is described. Results are presented which show a good fit to manufacturers' reflectivity curves. Experimental and simulation results for a screened room partially lined with ferrite are presented to demonstrate the accuracy of the method. INTRODUCTION The Transmission Line Matrix (TLM) method of num...

2016
Liqiu Guo Guomin Hua Binjie Yang Hao Lu Lijie Qiao Xianguo Yan Dongyang Li

Local electron work function, adhesive force, modulus and deformation of ferrite and austenite phases in a duplex stainless steel were analyzed by scanning force microscopy. It is demonstrated that the austenite has a higher electron work function than the ferrite, corresponding to higher modulus, smaller deformation and larger adhesive force. Relevant first-principles calculations were conduct...

2014
H. G. BELJERS

Resonance experiments are described on polycrystalline ferrite spheres in a microwave cavity with a linearly polarized magnetic field. Fundamental quantities, like the g-factor and the damping coefficient 'of the ferrite, are derived from the measurements. The damping coefficient can be calculated either from a linewidth measurement or from the maximum amount of absorption in the ferrite at res...

2007
F. G. Caballero M. K. Miller

New developments with bainite have resulted in a steel with an ultimate tensile strength of 2500 MPa, a hardness of 600-670 HV and a toughness in excess of 30-40 MPa m [1]. The novel microstructure is generated in a high carbon (0.98 wt.%) high silicon (1.46 wt.%) steel austenitized for 15 min. at 1000 oC, and then isothermally transformed at temperatures of ∼200 oC. Iron does not diffuse durin...

2013
Mothanna Sadiq Al-Qubaisi Abdullah Rasedee Moayad Husein Flaifel Sahrim HJ Ahmad Samer Hussein-Al-Ali Mohd Zobir Hussein Eltayeb EM Eid Zulkarnain Zainal Mohd Saeed Muna Ilowefah Sharida Fakurazi Norhaszalina Mohd Isa Mohamed Ezzat El Zowalaty

In this study, in vitro cytotoxicity of nickel zinc (NiZn) ferrite nanoparticles against human colon cancer HT29, breast cancer MCF7, and liver cancer HepG2 cells was examined. The morphology, homogeneity, and elemental composition of NiZn ferrite nanoparticles were investigated by scanning electron microscopy, transmission electron microscopy, and energy dispersive X-ray spectroscopy, respecti...

Journal: :Journal of environmental management 2013
Yao-Jen Tu Chen-Feng You Chien-Kuei Chang Shan-Li Wang

Arsenic (As) in groundwater and surface water is a worldwide problem possessing a serious threat to public health. In this study, a magnetic ferrite, was synthesized and investigated for its As(V) removal efficiency. The adsorption of As(V) by magnetic ferrite exhibited an L-shaped nonlinear isotherm, suggesting limiting binding sites on the adsorbent surface. The As K-edge X-Ray Absorption Nea...

2003
T. A. Palmer J. W. Elmer S. S. Babu J. M. Vitek

Spatially Resolved X-Ray Diffraction (SRXRD) has been used to identify a previously unobserved low temperature ferrite (δ)/austenite(γ) phase transformation in the heat affected zone (HAZ) of 2205 Duplex Stainless Steel (DSS) welds. In this “ferrite dip” transformation, the ferrite transforms to austenite in the weld HAZ at peak temperatures on the order of 750oC. The austenite then re-transfor...

2014
Petter Eklund Sandra Eriksson Mats Leijon

The price of rare-earth metals used in neodymium-iron-boron (NdFeB) permanent magnets (PMs) has fluctuated greatly recently. Replacing the NdFeB PMs with more abundant ferrite PMs will avoid the cost insecurity and insecurity of supply. Ferrite PMs have lower performance than NdFeB PMs and for similar performance more PM material has to be used, requiring more support structure. Flux concentrat...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید