This paper investigates 3D simulation of fluid flow in a centrifugal pump from the Detroit Diesel company to extract possible engine cooling trends.  The velocity and pressure profile of water, the coolant, is analyzed and the characteristic curves of the pump are derived. This provides a useful evaluation of the pump performance at all working conditions. For this aim, a computational fluid dy...

A novel method for groundwater lowering, which can be applied at construction sites, for aquifer remediation measures or in open mining, is proposed. In contrast to conventional techniques, dewatering is achieved without water conveyance. In this paper the physical concept of the new technology, referred as single borehole pump & inject, is modeled using COMSOL Multiphysics. Two and three dimen...

The aim of this study is to discover the characteristics of the cooling water in the cylinder head of a high-power diesel engine by using the Computational Fluid Dynamics (CFD). A 3-D geometric model of a cylinder head water jacket was previously constructed using Unigraphics software. A mesh was then imposed on the model using the preprocessor of Fluent software, GAMBIT. Three types of thermal...

The visualization community is currently witnessing strong advances in topologybased flow visualization research. Numerous algorithms have been proposed since the introduction of this class of approaches in 1989. Yet despite the many advances in the field, topology-based flow visualization methods have, until now, failed to penetrate industry. Application domain experts are still, in general, n...

Air path model of cabin for cooling module simulation for vehicle has been constructed according to the test, and the simulation results were compared with the test data to verify the authenticity of the module. This simulation model provides an effective platform for vehicle thermal management analysis. The module is used to simulate the different intake grills and to find how different grills...

Due to the dimple’s unique characteristics of comparatively low pressure loss penalty and good heat transfer enhancement performance, dimple provides a very desirable alternative internal cooling technique for gas turbine blades. In the present study, an experimental investigation was conducted to quantify the flow characteristics over staggered dimple arrays and to examine the vortex structure...

In this work, we focus on investigating electrothermal flow in rotating electric fields (ROT-ETF), with primary attention paid to the horizontal traveling-wave electrothermal (TWET) vortex induced at the center of the electric field. The frequency-dependent flow profiles in the microdevice are analyzed using different heat transfer models. Accordingly, we address in particular the importance of...

To provide the maximum possible cooling rate for the Recycler Electron Cooling (REC) [1], the cooling section has to be immersed into a high-quality longitudinal magnetic field. Namely, the solenoidal field of 50150 G should have an integral of the transverse component below 1 G⋅cm over the whole 20-m cooling section [2]. The transverse field components are measured by a dedicated compassbased ...

There are (at least) two unsolved problems concerning the current state of the thermal gas in clusters of galaxies. The first is identifying the source of the heating which offsets cooling in the centers of clusters with short cooling times (the “cooling flow” problem). The second is understanding the mechanism which boosts the entropy in cluster and group gas. Since both of these problems invo...

Easy-to-use thermal cycling for performing rapid and small-volume DNA amplification on a single chip has attracted great interest in the area of rapid field detection of biological agents. For this purpose, as a more practical alternative to conventional continuous flow thermal cycling, liquid plug-flow thermal cycling utilizes a thermal gradient generated in a serpentine rectangular flow micro...