To investigate the composition distribution that develops in continuously-cast steel during a grade change, an efficient, accurate, and user-friendly computational model has been developed. The model is fully transient and consists of three submodels, which account for mixing in the tundish, mixing in the liquid core of the strand, and solidification. The first submodel of mixing in the tundish...

Epoxy binders containing microballoons ranging from 38.5 to 57.7% by volume were cast in a mold and cured, and the resulting slabs were sectioned to yield short-beam test coupons. The strength changes with microballoons content were noted. These reveal an increase from 3.87 to 5.79 MPa for a decrease in microballoons content from 57.7 to 38.5%. Mechanical data were correlated with fractographic...

   A low carbon Al-killed Ti-added steel was produced in Mobarakeh Steel Complex in Iran. Mechanical properties and microstructural characterizations of steel in the as-cast, hot-rolled, cold-rolled and annealed conditions are presented. Dilatometery tests were carried out to measure the finishing and annealing temperatures of steel. It was found that the addition of small amounts of Ti increas...

a low carbon al-killed ti-added steel was produced in mobarakeh steel complex in iran. mechanical properties and microstructural characterizations of steel in the as-cast, hot-rolled, cold-rolled and annealed conditions are presented. dilatometery tests were carried out to measure the finishing and annealing temperatures of steel. it was found that the addition of small amounts of ti increased ...

A series of concrete slabs were cast with 0, 7, and 12% by mass silica fume replacement of cement at W/CM = 0.35, 0.40, and 0.45. After either moist or steam curing, a variety of chloride resistance tests were performed. These included AASHTO T259, modified T259, T277, as well as several bulk diffusion tests and sorptivity tests. Results indicate that the use of properly dispersed silica fume r...