In this investigation internal friction of cold worked 304L austenitic stainless steel was measured and the new peaks (PlIP2,P3) were found. The height of those peaks increased with cold work degree. The temperature of the main peak P3 was 33513340K at the frequency of -1,000Hz. The activation energies and frequency factors were obtained from peak shift. The values were 0.4evl 0.4evl 0.6ev and ...

in this article, the effect of parameters like working gap, work piece rotational speed and material removal mechanism(injection of the sic abrasive slurry and al2o3, use of diamond paste as abrasive tool) in magnetic abrasive finishing process using designing of experiments on the external surface of cylindrical work pieces of stainless steel aisi 440c to get minimum surface roughness has been...

Wire electric discharge machine (WEDM) is spark erosion in unconventional machining technique to cut hard and the conductive material with a wire as an electrode. The blanking die material SKD 11 is a high carbon and high chromium tool steel with high hardness and high wearing resistance property. This tool steel has broad application in press tools and dies making industries. In this research ...

Abstract Vanadis 6 cold work tool steel was vacuum austenitized, room temperature quenched, differently cryogenically treated (-75, -140 and -196 °C for different durations) double tempered, at temperatures of either 170 or 530 °C. Galling resistance assessed by pin-on-disc testing specimens against CuSn bronze, wide ranges sliding velocities loads. The obtained results show that cryogenic trea...

The automotive industry is using more and more of Advanced High Strength Steel in order to reduce the weight of the car. Since this will generate more springback, it is of vital importance to be able to predict the amount of springback in the parts. Otherwise, many late changes have to be made in order to fit the parts in their position. In order to increase the ability to understand and test t...

Article history: Received: 21.04.2014. Received in revised form: 02.07.2014. Accepted: 14.07.2014. Due to the high amount of carbon and diffusible hydrogen, high-strength wear-resistant steel NM360, which is widely used on excavating machinery, always tends to develop cold crack after welding. Heat affected zone (HAZ) is the weakest part in a welding joint and is the most probable location for ...