An Al-0.3%Cu alloy was deformed to high strains by cold rolling. The as-deformed samples were annealed at different temperatures until complete recrystallization. The cold rolling textures were determined by X-ray diffraction while the recrystallization textures and microstructures were characterized by electron backscatter diffraction. It was found that the rolling texture was characterized by...

production of thin steel strips with 0.18-0.26 mm thickness is about 0.75 of annual production of the two stand reversing cold mill, while its efficiency is 60%. this is due to the fact that after montaging the grinded work rolls, rolling thin steel strips (with thicknesses less than 0.18 millimeters) is unavailable. initially, unsuitable surface roughness, the friction between rolls and the st...

Using cold working fastener holes is a simple life enhancement procedure that strengthens metallic components by retarding crack growth around a hole. In the present paper, the residual stress field that is induced by the hole expansion process is obtained based on different material models namely elastic perfect plastic, isotropic hardening and kinematic hardening using three-dimensional finit...

Modeling the flow curves of materials at elevated temperatures is the first step in mathematical simulation of the hot deformation processes of them. In this work a comparative study was provided to examine the capability of three different constitutive equations in modeling the hot deformation flow curves of AZ91 magnesium alloy. For this, the Arrhenius equation with strain dependent constants...

Abstract In this work, a support vector machine (SVM) model was developed to predict the hot deformation flow curves of AZ91 magnesium alloy. The experimental stress-strain curves, obtained from hot compression testing at different deformation conditions, were sampled. Consequently, a data base with the input variables of the deformation temperature, strain rate and strain and the output variab...

The objective of this paper is to provide a state of the art review of the application of yield-line analysis to cold-formed steel members, and present a newly developed solution to the stresses that develop in an inclined yield-line. Yield-line analysis in cold-formed steel members is shown to be distinct from traditional yield-line applications. Challenges in the application of yield-line ana...

Mechanical properties and microstructures of commercially pure titanium (CP-Ti) developed by a newly designed multi-pass equal channel angular pressing (ECAP) process and cold drawing were investigated. The ECAP apparatus was developed in order to improve the efficiency of common ECAP and the performance of finished products. A much stronger CP-Ti billet was produced by using the proposed proce...

The microstructure and texture evolution of a commercially pure titanium sheet during cold-rolling is investigated in detail by X-ray diffraction and by orientation imaging in the FEG-SEM and in the TEM. The experimental data are compared with simulation results obtained by a viscoplastic self-consistent model. The aim of this work is to provide with a detailed description of the fine scale def...

Nano scale grain size reduction (UFG) is one of three suitable methods for improving the mechanical properties 6000 series aluminum alloys, by structural precipitation, strain hardening or cold work hardening. For working, several techniques are now available such as (ECAP - PC), (CEEA), (THP), (MM), (ARB), (CW). Cold compression high pressing (CW-CHP) can be applied in cycles depending on beha...

Cold drawing process is one of the most used metals forming processes in industries for forming seamless tubes. This process of plastic deformation of metals occurs below the recrystallization temperature and is generally performed at room temperature. When metal is cold worked, upon the release of forming force, the springback occurs. In this paper, the springback effect of the seamless tube t...