Silane coupling agents (SCAs) with different organofunctional groups were coated on the surfaces of Al₂O₃ ceramic particles through hydrolysis and condensation reactions, and the SCA-coated Al₂O₃ ceramic particles were dispersed in a commercial photopolymer based on interpenetrating networks (IPNs). The organofunctional groups that have high radical reactivity and are more effective in UV curin...

In this work, the vibrations of viscoelastic functionally graded Euler–Bernoulli nanostructure beams are investigated using the fractional-order calculus. It is assumed that the functionally graded nanobeam (FGN) is due to a periodic heat flux. FGN can be considered as nonhomogenous composite structures; with continuous structural changes along the thick- ness of the nanobeam usually, it change...

Componeer is an emerging esthetic solution for the treatment of discolored, fractured, or congenitally malformed teeth, which once required full-coverage restorations. Componeers combine the superior esthetic of ceramic veneers, and the bondability to tooth structure like direct composite veneers. Precontoured enamel shells with excellent color stability, no laboratory procedure, and cost effec...

INTRODUCTION Zirconium is a metal with excellent biocompatibility, which when oxidized is converted to the ceramic, zirconia. Composite-bearing materials have recently become available consisting of a metal zirconium core with an oxidized zirconia surface. The metal-ceramic composite has the wear characteristics of a ceramic bearing but with a much lower propensity for fracture. This dual advan...

The purpose of the present study is to evaluate the fracture load of composite-based repairs to fractured zirconium oxide (Z) crowns and to ceramic-fused-to-metal (CM) crowns, comparing different mechanical surface preparation methods. A total of 75 crowns were repaired; samples then underwent dynamic loading and thermocycling. Final fracture load values for failure of the repaired crowns were ...

At this very moment an increasing interest in the field of high-temperature electronics is observed. This is a result of development in the area of wide-band semiconductors’ engineering but this also generates needs for passives with appropriate characteristics. This paper presents fabrication as well as electrical and stability properties of passive components (resistors, capacitors, inductors...

Multi-strip resonator BPF is fabricated in the LTCC configuration. The center frequency is 3.5GHz, fractional bandwidth is 0.1 and 3-stage Chebyshev type is designed. The relative permittivity of the ceramic is 18.3, resulting in the size as small as 2.3 × 1.6 × 0.73mm. The in-band loss is 3.5 dB, which could be reduced in the stable mass production state. The spurious suppression of more than ...

OBJECTIVES To determine the longevity of heat-pressed glass ceramic inlays and onlays luted with solely light-curing composite resin. METHODS The records of patients who had received a ceramic inlay or onlay at the Heidelberg University Department of Conservative Dentistry from 1993 to 2002 were evaluated. The mean observation time and the survival probability of the ceramic inlays and onlays...