since the energy analysis considers the quantity of energy, it cannot show the performance of the cooling tower. therefore, in order to optimize the performance of the tower and also the process which the cooling tower is a part of it, it is necessary to analyze the energy and exergy of the tower simultaneously. in this paper, the energy and exergy of one of the cooling towers of khuzestan stee...

The aim of the present research is to simulate the heat treatment process of the autogenous grinding (AG) shell liner of Cr-Mo steel in different quenching media (still air, air blowing, oil and water) using ABAQUS software, in order to calculate the cooling curves. In this regard, the microstructure and hardness for each arbitrary point within the mill liner's bulk could be predicted based on ...

This work studied the viabilities of five types of cells (two yeast cells, Saccharomyces cerevisiae CBS 1171 and Candida utilis; two bacterial strains, Escherichia coli and Lactobacillus plantarum; and one human leukemia K562 cell) as a function of cooling rate during freezing. The range of investigated cooling rates extended from 5 to 30,000 degrees C/min. Cell viability was classified into th...

A water-based cooling system is being investigated to meet the requirement of Gas Electron Multiplier (GEM) based Muon Chamber (MuCh) detector Compressed Baryonic Matter (CBM) experiment at GSI, Germany. The on circulating cold water through channels inside an aluminium plate. plate attached a GEM chamber. feasibility study conducted one small and two real-size prototype plates. microcontroller...

This paper presents a universal engineering model, which can be used to formulate both counterflow and crossflow cooling towers. By using fundamental laws of mass and energy balance, the effectiveness of heat exchange is approximated by a second order polynomial equation. Gauss-Newton and Levenberg-Marquardt methods are then used to determine the coefficients from manufactures data. Compared wi...

Water activities (potentials) in plant materials were measured over the range from free water to oven dryness with a Spanner thermocouple psychrometer. In a two-step procedure, water was first condensed on the thermocouple junction for several minutes. The sample was then inserted under the wet thermocouple and the maximum psychrometric cooling was measured in about 10 seconds. Calibration was ...

In cold winter weather, the air-cooled condensers (ACCs) face serious freezing risks, especially with part load of the power generating unit. Therefore, it is of benefit to investigate the heat transfer process between the turbine exhaust steam and cooling air, by which the freezing mechanism of the finned tube bundles can be revealed. In this work, the flow and heat transfer models of the cool...

Temperature control during the cutting process with different parameters such as cutting velocity and applying water cooling is essential to decrease the cutting force, increase the life of the cutting tool and decrease the machined surface temperature of work-piece. In this research, the temperature of machined surface and the chip-tool interface in orthogonal cutting process of Ti-6Al-4V were...

OBJECTIVE: To assess whether ice-water immersion or cold-water immersion is the more effective treatment for rapidly cooling hyperthermic runners. DESIGN AND SETTING: 17 heat-acclimated highly trained distance runners (age = 28 +/- 2 years, height = 180 +/- 2 cm, weight = 68.5 +/- 2.1 kg, body fat = 11.2 +/- 1.3%, training volume = 89 +/- 10 km/wk) completed a hilly trail run (approximately 19 ...

This paper presents a numerical study to investigate the feasibility of transporting mist through the internal cooling channel in high-pressure turbine vanes for film cooling over the vane's surface. The idea of using mist film cooling to enhance conventional air cooling has been proven to be a feasible technique in the laboratory conditions and by computational simulations. However, there is a...