Chromium has been used commercially in the United States for more than 100 years in metal alloys and other compounds, as a pigment, and in the tanning and metal plating industries, and many studies have looked at its effects in terms of occupational health. But, although scientists know that Cr(VI) is a human carcinogen and that it can cause other deleterious health effects including kidney and...

A flip-chip, batch transfer process for LIthographie, Galvanoformung and Abformung (LIGA) microstructures has been demonstrated by selective electroplating and bonding. Single layer LIGA microstructures with thickness of 200 m are fabricated on a dummy substrate first. They are then batch transferred to an IC substrate by means of bonding via electroplating. After the selective bonding process,...

A real time image-guided electroplating system is proposed in this paper. Unlike previous electroplating systems, instead of using the intermittent mode to electroplate 500um long copper specimen, a CCD camera and a motion controller are used to adjust anode-cathode distance to obtain better results. Since the image of the gap distance is highly deteriorated due to complex chemical-electrical o...

Metal deposition by electroplating has been extensively used and analyzed for industrial applications, but it remains insufficiently characterized for fabricating compliant micromechanisms. This research presents a new fabrication process for heterogeneous optimized compliant mechanisms that consists of placing two materials side by side as opposed to the convention of stacking materials layer ...

Hydroxide-metal sludges from electroplating industry are a potential source of environmental contamination due to their high content of heavy metals. The incorporation of these residues in a ceramic matrix can be a promising way to suppress the harmful effect of metals normally present in those sludges. This work reports the role of the mixing time between the waste and ceramic materials and of...

The purpose of this study was to evaluate the effects of the rate of argon gas flow on joint strength in the laser-welding of cast metal plates and to measure the porosity. Two cast plates (Ti and Co-Cr alloy) of the same metal were abutted and welded together. The rates of argon gas flow were 0, 5 and 10 L/min for the Co-Cr alloy, and 5 and 10 L/min for the Ti. There was a significant differen...