The fabrication of glass capillary microfluidic devices is technically challenging, often hampering use of the design. We describe a new technique, based on commercially available components, for assembling flow focusing capillary devices that can readily be taken apart and cleaned between uses. This design strategy allows for generation of both water-in-oil and oil-in-water emulsions in the sa...

A fundamental 2-D model was developed to predict the heat and mass transfer that occur during the frying and cooling process of tortilla chips. Semi-empirical correlations were included to account for structural changes, such as shrinkage and expansion due to puffing. All water present in the tortilla chip was considered bound and led to shrinkage when removed. The parameters that were studied ...

Oxygen permeability and water diffusion characteristics were determined for several types of hydroxyethyl-methacrylate hydrophilic contact lenses and a silicone contact lens material. A twoto fourfold difference in the diffusion rates for capillary flow of water was found among the different hydrophilic lenses. Oxygen permeability studies demonstrate that the hydrophilic lenses are capable of t...

In this paper we prove a global regularity result for a quadratic quasilinear model associated to the water waves system with surface tension and no gravity in dimension two (the capillary waves system). The model we consider here retains most of the difficulties of the full capillary water waves system, including the delicate time-resonance structure and modified scattering. It is slightly sim...

We report a parallelized capillary microfluidic device for enhanced production rate of monodisperse polymersomes. This device consists of four independent capillary microfluidic devices, operated in parallel; each device produces monodisperse water-in-oil-in-water (W/O/W) doubleemulsion drops through a single-step emulsification. During generation of the double-emulsion drops, the innermost wat...

The formation–distribution of condensed water in diffusion medium of proton exchange membrane fuel cells, and its tendency to reduce the local effective mass diffusivity and to influence cell performance, are studied. First the local effective mass diffusivity of a fibrous diffusion medium is determined as a function of the local porosity and local water saturation, using the network model for ...

An open-tubular capillary chromatography is developed based on tube radial distribution of the ternary mixed carrier solvents of water-hydrophilic/hydrophobic organic under laminar flow conditions. This is called “tube radial distribution chromatography” (TRDC). Fluidic behavior of the polymer compounds, FluoSpheres (1.0 m diameter), was examined by the TRDC system. The ternary mixture of wate...

We study the spontaneous formation of granular towers produced when dry sand is poured on a wet sand bed. When the liquid content of the bed exceeds a threshold value W*, the impacting grains have a nonzero probability to stick on the wet grains due to instantaneous liquid bridges created during the impact. The trapped grains become wet by the capillary ascension of water and the process contin...

Synchrotron x-ray reflectivity is used to study the interface between bulk water and bulk n-alkanes with carbon numbers 6 through 10, 12, 16, and 22. For all interfaces, except the water-hexane interface, the interfacial width disagrees with the prediction from capillary-wave theory. The variation of interfacial width with carbon number can be described by combining the capillary-wave predictio...

Off-specular diffuse x-ray scattering measurements on both pure water and a homogeneous Langmuir monolayer of poly-g-benzyl-L-glutamate (PBLG) on water establish the validity of a proposed sum rule for scattering from capillary fluctuations on liquid surfaces. Excess scattering above the predicted capillary contribution is observed when the PBLG monolayer is compressed beyond its elastic limit....