The openings of Copper converter in Sarcheshmeh Copper Complex in Iranis made of a heat resisting austenitic steel (Fe-25Cr-12Ni) and many failures have been reported. Understanding the failure mechanism of the alloy helps to develop better alloys for similar complex environments. Samples of as-cast alloy and those taken from failed ones were examined. Optical Microscopy (OM), X-Ray Diffraction...

A program has been conducted on the effects of Mg in cast alloy 718. The results show that small amounts of Mg improves impact toughness and decreases Nb segregation by decreasing secondary dendrite arm spacing which results in less and smaller interdendritic Laves and MC eutectics. Small amounts of Mg produce a more spheroidal as well as a more dispersive MC phase. Impact toughness was found t...

In this work, the microstructural evolutions and mechanical properties of an as-cast Mg-10Gd-4Y-1.5Zn-0.5Zr (wt %) alloy during successive multi-pass equal channel angular pressing (ECAP) were systematically investigated by X-ray diffractometer, scanning electron microscopy, transmission electron microscopy, and compression test. The obtained results show that the microstructure of as-cast allo...

The objective of this study was to investigate the joint properties between cast gold alloys and Co-Cr alloy laser-welded by Nd:YAG laser. Cast plates were fabricated from three types of gold alloys (Type IV, Type II and low-gold) and a Co-Cr alloy. Each gold alloy was laser-welded to Co-Cr using a dental laser-welding machine. Homogeneously-welded and non-welded control specimens were also pre...

It is generally accepted that the electrochemical discharge capacity of a hydrogen storage alloy is closely related to its crystal characteristics. From our experiment, the discharge capacity of AB type Laves phase hydrogen storage alloy ZrCr Mn V Ni 2 0.4 0.2 0.1 1.3 21 21 decreased sharply from 324 mAh g to 25 mAh g after amorphization by mechanically milling the crystalline (as-cast) alloy w...