This study compares and quantifies the simulated effects of noise, index errors, and photometric level errors on different optical monitoring layer termination strategies. A computer program to simulate optical thin film monitoring has been written for this work. The study looked at these termination methods: quartz crystal monitoring, photometric level cut, two types of turning point terminati...

Enhancing the light absorption in ultrathin-film silicon solar cells is important for improving efficiency and reducing cost. We introduce a double-sided grating design, where the front and back surfaces of the cell are separately optimized for antireflection and light trapping, respectively. The optimized structure yields a photocurrent of 34.6 mA/cm(2) at an equivalent thickness of 2 μm, clos...

We show that a scattering-reduction effect is obtained by coating a rough surface with an antireflection layer. This research is a generalization of Amra's [J. Opt. Soc. Am. A 10, 365-374 (1993)] study of smooth surfaces conducted with a first-order theory to the case of rough surfaces. We show that the differential method with the R matrix algorithm can be used to study scattering from multila...

We report significant performance improvement of a mode-locked fiber laser gyroscope. A Fabry-Perot cavity GaAlAs laser diode whose front facet was antireflection coated was used as a gain medium. The rms noise equivalent rotation rate measured with a time-interval counter was improved to 0.06deg/ radicalh. The long-term drift of the gyroscope signal was reduced to 100deg/ radicalh after a pola...

Imaging with a back-illuminated CMOS imager provides a number of advantages, especially as the pixel size is reduced. These advantages include high (1 00%) fill-factor and increased quantum efficiency, efficient implementation of antireflection coatings, improved angular response, availability of the traditional “frontside” of the pixel to incorporate in-pixel processing circuits, and increased...

A broadband non-dispersive thin-film polarizer for ultrafast applications is presented. The polarizer has a controllable flat-phase and a high extinction ratio of 23:1 in the working bandwidth from 680 nm to 900 nm. This bandwidth allows supporting laser pulses down to 12 fs. The unavoidable mechanical stress of the interference coating is completely compensated by a specially designed antirefl...

Optical characteristics of germanium telluride (GeTe) thin films in multilayer structures are calculated. A model a optical coating with four-level transmission coefficient is developed. Based on the calculated data, thickness values determined at which transmittance change greatest for 1550-nm modulated radiation. Experimental samples coated antireflection GeTe synthesized and their investigat...

In this work, Au-Bi(2)Te(3) nanocomposite thermoelectric film with a hierarchical sub-micron antireflection quasi-periodic structure was synthesized via a low-temperature chemical route using Troides helena (Linnaeus) forewing (T_FW) as the biomimetic template. This method combines chemosynthesis with biomimetic techniques, without the requirement of expensive equipment and energy intensive pro...