In situ three terminal electron field emission characterization of an isolated multiwalled carbon nanotube has been performed, where both anode and gate electrodes are attached to high precision piezodrivers. All measurements are performed in a scanning electron microscope allowing accurate knowledge of the local environment of the nanotube to be obtained. It is shown that the presence of the g...

The carbon nanotube field emitter array was grown on silicon substrate through a resist-assisted patterning (RAP) process. The shape of the carbon nanotube array is elliptical with 2.0 × 0.5 mm for an isotropic focal spot size at anode target. The field emission properties with triode electrodes show a gate turn-on field of 3 V/μm at an anode emission current of 0.1 mA. The author demonstrated ...

Modelling of the arc in electric arc welding is significant to achieve a better process understanding, thus gain better weld quality and a more efficient production process. It requires knowing the conditions at the surfaces of the anode and cathode. These conditions are very difficult to set from measurements and should be calculated. This requires modelling the complex physics of the electrod...

The electrochemical oxidation of the digested effluent from anaerobic digestion of dairy manure was investigated in this study. The digested effluent sample containing with suspended solids was pretreated by filtration for the electrochemical experiment. The influence of direct anodic oxidation and indirect oxidation was evaluated through the use of dimensionally stable anode (DSA) and Ti/PbO2 ...

In this study, the single chamber microbial fuel cell (MFC) with annular configuration and spiral anode geometry is proposed for future large-scale applications. Dairy wastewater containing complex organic matter was used as substrate. Factors affecting power generation and internal resistance of this MFC such as substrate injection, electrode surface area, and substrate concentration were inve...

The performance of microbial electrochemical cells depends upon microbial community structure and metabolic activity of the electrode biofilms. Iron as a signal affects biofilm development and enrichment of exoelectrogenic bacteria. In this study, the effect of ferrous iron on microbial communities of the electrode biofilms in microbial fuel cells (MFCs) was investigated. Voltage production sho...

The dyes extracted from pomegranate and berry fruits were successfully used in the fabrication of natural dye sensitized solar cells (NDSSC). The morphology, porosity, surface roughness, thickness, absorption and emission characteristics of the pomegranate dye sensitized photo-anode were studied using various analytical techniques including FESEM, EDS, TEM, AFM, FTIR, Raman, Fluorescence and Ab...

An efficient and convenient synthesis of novel tetrahydrobenzo[c]acridin-8(7H)-one derivatives is described using the electrogenerated anion of acetonitriles as the base in the presence of tetrabutylammonium fluoride as an effective supporting electrolyte in a one-pot, three-component condensation of aromatic aldehyde, dimedone and 1-naphthyl amine. The reaction is carried out in an undivided c...

Applying microbial electrochemical technologies for the treatment of highly saline or thermophilic solutions is challenging due to the lack of proper inocula to enrich for efficient exoelectrogens. Brine pools from three different locations (Valdivia, Atlantis II and Kebrit) in the Red Sea were investigated as potential inocula sources for enriching exoelectrogens in microbial electrolysis cell...

Scaling up microbial fuel cells (MFCs) requires a better understanding the importance of the different factors such as electrode surface area and reactor geometry relative to solution conditions such as conductivity and substrate concentration. It is shown here that the substrate concentration has significant effect on anode but not cathode performance, while the solution conductivity has a sig...