Two-step thermal oxidation was proposed for Ti and Ti alloys as a surface-treatment process for preparing an anatase-containing TiO2 layer. This process consisted of treatment in a CO-containing atmosphere (first step) and subsequent treatment in air (second step). In this chapter, first, the current status of TiO2 coating onto Ti and Ti alloys for biomedical applications is reviewed; then our ...

It is known that TiO2 exhibits good photocatalytic properties which could be used in various commercial applications such as water and air purification or photo-induced biodegradation of microbes. TiO2 occurs in nature in the form of three crystal polymorphs: anatase, brookite and rutile. For photocatalytic applications only anatase and rutile are of interest, however anatase shows greater phot...

Single anatase TiO₂ nanowire is synthesized using the electrospinning technique with the sol-gel method and is suspended over a pre-processed 100 µm-wide TEM grid for further characterization. The diameters of the nanowires fall in the range of 250-400 nm. The transient electrothermal (TET) method is adopted to acquire the voltage-time (U-t) profile of the Ir-coated nanowire under step Joule he...

A new turbulent, premixed, stagnation swirl flame (SSF) is used to synthesize titanium dioxide (TiO2) nanopowders. Synthesis conditions under two flame modes, i.e., burnerand substrate-stabilized SSF, are investigated, for the same equivalence ratio, but different inert-dilution ratios. The particles (collected on the substrate) have high anatase purity, with mean diameters of 5–10 nm, determin...

Bone has a built-in electric field because of the presence of piezoelectric collagen. To date, only externally applied electric fields have been used to direct cell behavior; however, these fields are not safe or practical for in vivo use. In this work, for the first time, we use a periodic microscale electric field (MEF) built into a titanium implant to induce osteogenesis. Such a MEF is gener...

Anatase TiO2 modified FeS nanowires assembled by numerous nanosheets were synthesized by using a typical hydrothermal method. The carbon-free nanocoated composite electrodes exhibit improved reversible capacity of 510 mAh g(-1) after 100 discharge/charge cycles at 200 mA g(-1), much higher than that of the pristine FeS nanostructures, and long-term cycling stability with little performance degr...

The correlation between the textural properties and the photocatalytic activity of nanocrystalline Titanium dioxide (TiO2)-anatase films obtained by sol–gel has been investigated. Mesoporous and mesostructured TiO2-anatase films were prepared using different titanium precursors and Pluronic (F127) and polyethylene glycol hexadecyl ether P5884 (Brij58) surfactants via acid catalysis. Ca(NO3)2 an...

Aligned TiO2 nanotube layers (TiNTs) grown by self-organizing anodization of a Ti-substrate in a fluoride-based electrolyte were decorated with graphitic-phase C3N4 (g-C3N4) via a facile chemical vapor deposition approach. In comparison with classical TiO2 nanotubes (anatase), the g-C3N4/TiNTs show an onset of the photocurrent at 2.4 eV (vs. 3.2 eV for anatase) with a considerably high photocur...

Anatase TiO2 structures with nanorice-like morphology and high exposure of (001) facet has been successfully synthesized on an ITO surface using ammonium Hexafluoro Titanate and Hexamethylenetetramine as precursor and capping agent, respectively, under a microwave-assisted liquid-phase deposition method. These anatase TiO2 nanoparticles were prepared within five minutes of reaction time by util...

Pure nanocrystalline titanium Oxide (TiO2) powder has been synthesized by the sol-gel technique using titanium tetra-isopropoxide as the starting precursor. As-prepared samples were calcined at different temperatures, 400, 600, 800 and 900°C. X-ray diffraction (XRD) analysis was used to find the crystalline structure and changes in the polymorphs with calcination. The as-synthesized TiO2 powder...