A prospective clinical trial was carried out to compare argon laser-curing of a traditional light-activated composite resin with conventional visible light-curing in terms of bond failure rate and incidence of enamel decalcification. Forty-five patients with a total of 742 metal brackets bonded to the upper and/or lower teeth in a modified split-mouth design participated in the study. The adhes...

The aim of this study was to evaluate the depth of curing of 10 contemporary blue light-activated dental flowable materials at several opacities, influenced by different irradiation times using FT-IR spectroscopy. Fifty-five specimens (n = 5) with a 5-mm diameter and 1-mm thickness of translucent (Opallis Flow T), yellowed (Master Flow A2; Opallis Flow A2; Natural Flow A2; Fluroshield Yellowed)...

BACKGROUND Attachment strength of fouling organisms on silicone coatings is low. We hypothesized that low attachment strength on silicones is, in part, due to the interaction of surface available components with natural glues. Components could alter curing of glues through bulk changes or specifically through altered enzyme activity. METHODOLOGY/PRINCIPAL FINDINGS GC-MS analysis of silicone c...

The mechanical properties of the light-cured composite resins are related to the material composition, but also vary according to the light-source characteristics used for polymerization. In this study we followed the compressive strength variation for a light-cured composite resin according to the time of exposure to the curing light. With that end in view,18 test pieces were made from a light...

CO₂ emitted from building materials and the construction materials industry has reached about 67 million tons. Controls on the use of consumed fossil fuels and the reduction of emission gases are essential for the reduction of CO₂ in the construction area as one reduces the second and third curing to emit CO₂ in the construction materials industry. In this study, a new curing method was address...

This paper investigated the curing effects on the mechanical properties of calcium-containing geopolymer mortar. Three precursors are used: Class C fly ash, Class F fly ash plus calcium hydroxide and Class F fly ash plus slag. Curing conditions included: (1) standard curing at 20 ± 3 °C and RH 95% (C); (2) steam curing at 60 °C for 24 h (S); (3) steam curing at 60 °C for 6 h (S6); and (4) oven ...

A novel trifunctional epoxy resin 4-(3, 3-dihydro-7-hydroxy-2, 4, 4-trimethyl-2H-1-benzopyran-2-yl)-1, 3-benzenediol glycidyl (shorted as TMBPBTH-EPOXY) was synthesized in our lab to improve thermal performance. Its curing behavior and performance were studied by using 4, 4′-diaminodiphenyl sulfone (DDS) as hardener with the mass ratio of 100:41 of TMBPBTH-EPOXY and DDS. The curing activation e...

This paper describes some of the main results of an investigation on the effect of passing saturated lime solution with different curing time on the clayey soil. Six series of laboratory tests had been set up, on lean clay samples, to investigate simultaneously the effect of volume of solution and curing time. The samples were classified based on average volume of passing. Three categories were...

Three C21-based reactive polyamides were synthesized from tung oil and different polyamines. The thermal and mechanical properties of cured products of the C21-based polyamides and diglycidyl ether of bisphenol A (DGEBA) were investigated. It was found that the cured materials were superior to those cured by C36-based polyamides in tensile strength and flexural strength and had a better flexura...

This paper reports the characterization of a photosensitive benzocyclobutene (BCB), a low dielectric constant spin-on polymer for use as interlayer dielectric in the microelectronics industry. Research work is divided into three main sections. First, BCB thin film characterization was done to investigate the effects of curing conditions on BCB film thickness, dielectric properties, optical prop...