in this research, surface composite layers containing nano sized tib2, al2o3-tib2, zro2 and cnt particles have been fabricated on aluminum alloy substrates by friction stir processing. the effects of different processing variables such as number of passes and strengthening particle distribution, hardness, and wear properties of surface nanocomposite layers have been evaluated by electron micros...

The effect of loading rate on the plane stress fracture toughness properties of a 3.2-mm thick 2219-T87 aluminum alloy plate was investigated with center-cracked panels. Plane-stress J-resistance curves were generated at a constant displacement rate of 10-6 and 5.7 m s-l. Dynamic fracture testing was performed with a coupled pressure plates technique. Fracture initiation and propagation toughne...

In this paper, aluminum alloy samples were fabricated by selective laser melting (SLM) and subsequently T2 heat treatment was undertaken. In order to obtain comprehensive results, various experiments on densification, hardness, tensile strength, bending strength and microstructure characterization were carried out. The results show that densification of samples after T2 heat treatment does not ...

Aluminum-based composites find its importance in the field of automobile and aerospace industries owing to their improved mechanical and microstructure properties are utilized for producing cylindrical components in LM6 alloy. Among all types of metal matrix composites (MMCs), considerable attention has been paid towards synthesis and characterization of aluminum matrix composites due to its li...

Results of internal friction measurements on the commercial aluminum-magnesium alloys 5052,5086 and 5486 are reported here over the temperature range 50 mK to 300 K, and compared with published data on alloy 5056. Effects of heat treatment and explosive bonds on the internal friction are evaluated. The quality factor of proposed multi-layer aluminum-alloy spherical resonant-mass detectors of gr...

Al-Ti-B master alloys are widely used in the aluminum industry as grain refiners for the control of the microstructure of the aluminum alloys. The SHS (self-propagating high-temperature synthesis) is an ex situ method that uses exothermic reactions to sustain the chemical reaction in a combustion wave. The advantages of SHS are the low energy requirement, simplicity and product purity. However,...

Recent experiments have been conducted at NRL which were designed to evaluate the chemical reactivity of exploding conductor fuses and to relate the chemical process to fuse electrical performance. In these experiments, metallic fuses including aluminum wire and foils, lithium-aluminum alloy wire, and copper wire were vaporized in distilled water. Additionally, less precise tests were conducted...

In this study, 5052 Al–Mg alloy was pre-treated and friction stir processing (FSP) was then performed on the specimens to explore the deformation resistance. The experimental results indicate that the FSP specimens not only had better tensile properties but also better vibration fracture resistance. It is significant that the tensile elongation and deformation resistance tended to increase as t...