Submitted: Jul 11, 2013; Accepted: Aug 9, 2013; Published: Aug 25, 2013 Abstract: The method of power-efficient two-stage dehydrogenation of isopentane to isoprene considered in this study comprises the production of a mixture of isoamylene at the first stage, further dehydrogenation of which occurs with a smaller endothermal effect. The effectiveness of the proposed method for energy saving is...

In this paper, the development of a new potassium carbonateon alumina support sorbent prepared by impregnating K2CO3 with an industrial grade of Al2O3 support was investigated. The CO2 capture capacity was measured using real flue gas with 8% CO2 and 12% H2O in a fixed-bed reactor at a temperature of 65 °C using breakthrough curves. The developed sorbent showed an adsorption capacity of 66.2 mg...

Introduction We employ a combined computational-experimental approach to probe the Lewis acidity of silica-alumina, and extend this study to the effect of Lewis acidity on the activation and activity of a supported methyltrioxorhenium (MTO) metathesis catalyst. Despite the widespread use of amorphous silica-alumina as a catalyst and a catalyst support, the structures of its Lewis acid sites rem...

In this work a series of solid sorbents were synthesized by immobilizing liquid amines on the surface of a mesoporous alumina. The samples were chemically characterized and BET surface areas calculated from the N2 adsorption isotherms at 77 K. The CO2 capture performance of the sorbents and their thermal stability was studied by thermogravimetric methods. The effect of amine loading on the CO2 ...

New porous biomaterials based on hydroxyapatite (HAp) were designed as obturation materials for dental cavities. Synthetic HAp powder with a particle diameter of 150 m was agglutinated using three different polyurethane monocomponents (rigid, semi-rigid, and flexible), enabling the matching of their properties to those of real teeth. Alumina particles were also added in some cases. Our new hybr...

Sonochemical preparation of Co and Ni promoted MoS(2) supported on alumina was achieved by high-intensity ultrasonic irradiation of isodurene solutions containing molybdenum carbonyl, dicobalt octacarbonyl, elemental sulfur, and Al(2)O(3) or Ni-Al(2)O(3) under Ar flow. The sonochemically prepared catalysts were characterized by elemental analysis, XPS, SEM, TEM, and XEDS, and hydrodesulfurizati...

On the basis of the affinity of alumina towards hydroxyl functional groups, a solid phase microextraction (SPME) fiber was constructed using alumina powder and poly(vinyl chloride) (PVC). Different compositions were tested and alumina:PVC (97:3) was selected as an optimun composition. A piece of silver wire was used as fiber support. The fiber producing was simple and could be completed in a fe...

This work reports a nonlithographic nanopatterning approach to fabricate perfectly ordered nanoparticle arrays with tunable and uniform dimensions from about 30 to 80 nm and strict periods of 100 nm in a square lattice on large-area substrates by combining nanoimprinting with ultrathin alumina membrane technique. There is no requirement of any organic layer to support an ultrathin membrane in o...

A preferentially oriented mordenite membrane was successfully prepared on a seeded porous a-alumina support. Characterization results of XRD (X-ray diffractometer) and FE-SEM (field emission scanning electron microscope) revealed that evolutionary selection might predominantly contribute to the formation of the sharply oriented mordenite membrane. The necessary conditions under which evolutiona...

Simultaneous application of colloidal processing and liquidforming additives to alumina resulted in a sintered density of >99% in 1 h at a temperature as low as 1070°C for a commercial high-purity alumina powder at a total dopant level of 2 mol%. The additives were 0.9% CuO + 0.9% TiOz + 0.1% B 2 0 3 + 0.1% MgO. At higher temperatures or after prolonged sintering, the doped alumina ceramic deve...