PURPOSE The discoloration of acrylic resin denture bases may lead to significant esthetic problems. The aim of this in vitro study was to investigate the effects of frequently consumed drinks on the color changes of fresh and aged, heat-polymerized, conventional acrylic resin. MATERIALS AND METHODS Eighty-four, heat-polymerized acrylic resin specimens (4 mm x 5 mm x 30 mm) were fabricated. Ha...

PURPOSE The aim of the study was to evaluate the effect of 3 silicone primers and 3 surface characterization of acrylic resin surface on bond strength between silicone elastomer and acrylic resin. MATERIALS AND METHODS 96 Cosmesil silicones bonded to heat-curing acrylic resin were fabricated with the dimension of 75 × 10 × 3 mm. The 3 primers used in this study were G611 platinum primer, A-33...

An orthopaedic surgeon developed dermatitis from acrylic materials. The acrylic monomer was found to penetrate surgical rubber gloves readily. Cases of "rubber glove dermatitis" with negative patch tests may have a similar explanation. Laboratory tests suggest that monomer does not damage rubber sufficiently to allow bacteria to penetrate gloves, but it remains possible that this would happen u...

Polymethyl methacrylate (PMMA) is one of the most widely used materials in prosthetic dentistry. Since it was introduced to dentistry, it has been successfully used in construction of denture bases. Acrylic resins have been successful as denture bases because of their ease of processing, low cost, light weight, and colour matching ability,however, acrylic resin denture base materials are low in...

INTRODUCTION Acrylic bone cements, used in arthroplasty, incorporates contrast media to make them radiopaque and visible on X-ray images. However, today’s particulate contrast media cause three disadvantages to the acrylic bone cement, namely; third body wear, decreased mechanical properties and reduced biocompatibility. Iohexol hexaacetate (IHA) is a new iodide based non-ionic contrast medium,...

background: the aim of this work was to study the output factors for linac using different ionization chambers and build up caps. materials and methods: output factors were measured for open square fields (3 × 3 cm to 40 × 40 cm) defined by collimator jaws for 6 and 15 mv photon beams from a varian clinac 2100c accelerator were measured. the measurements in air were performed using compact cyli...

PURPOSE To compare primary implantation of foldable hydrophilic acrylic with polymethylmethacrylate (PMMA) intraocular lenses (IOLs) in pediatric cataract surgery in terms of short-term complications and visual outcomes. METHODS This randomized clinical trial included 40 eyes of 31 consecutive pediatric patients aged 1 to 6 years with unilateral or bilateral congenital cataracts undergoing ca...

STATEMENT OF PROBLEM Despite the numerous positive features of acrylic denture base, there are a number of undeniable associated disadvantages. The properties of denture base have been improved through various interventions including application of different types of filler and coatings. OBJECTIVES This study aimed to evaluate the surface roughness, thickness and coating quality of organic-in...

BACKGROUND Given the high prevalence of oral candidiasis and the restricted number of antifungal agents available to control infection, this study investigated the in vitro antifungal activity of alcohol vinegar on Candida spp. and its effect on the physical properties of acrylic resins. METHODS Tests to determine the Minimum Inhibitory Concentration (MIC) and Minimum Fungicidal Concentration...

Harold Vernon first introduced acrylic polymers as denture base materials in 1937. A survey showed that 33% of denture repairs were to restore debonded teeth.1 Factors that affect the bonding of acrylic resin teeth to the denture base are dewaxing procedures, residual wax on ridge laps of teeth,2 and careless application separating media like sodium alginate to the teeth, leading to contaminati...