We have comprehensively investigated the degradation mechanism of AlGaAs/InGaAs pseudomorphic high-electron-mobility transistors (PHEMTs) under operation in high humidity conditions. PHEMTs degradation under high humidity with bias consists of a decrease in maximum drain current (Imax) caused by a corrosion reaction at the semiconductor surface at the drain side. The decrease in Imax is markedl...

By macroscopic observation, composition analysis, mechanical properties test, SEM, energy spectrum, overall grip tensile test and finite element mechanics calculation method, the strain clamp steel anchor corrosion failure of a 500 kV transmission line is analysed. The results show that for 31 years are result natural corrosion, rate accelerated due to galvanic crevice stress damaged surface ga...

Plastic encapsulated microcircuits with aluminum triple track structures were exposed to mixed flowing gas conditions to simulate and accelerate possible environments during long-term storage. No increase in resistance was measured and no corrosion products were observed after 800 h of accelerated exposure. Further experimentation indicated that chloride gas reacts with surface moisture in micr...

Microbes in marine biofilms aggregated into clusters and increased the production of extracellular polymeric substances (EPS), by over 100% in some cases, when the seawater media containing toxic metals and chemicals, such as Cd(II), Cu(II), Pb(II), Zn(II), AI(III), Cr(III), glutaraldehyde, and phenol. The formation of microbial cluster and the increased production of EPS, which contained 84-92...

For liquid breeder blanket system using molten salts, tritium barrier, anti-corrosion barrier, tritium recovery system and heat exchanger make important roles. Especially in the heat exchanger, the tritium permeation from primary coolant loop to secondary coolant loop must be inhibited by the tritium barrier for safety. To develop it, it is essential to optimize chemical stability of the barrie...

Bacteria biofilm formation on metals is well-known, while biofilm architecture varies under different conditions. To date, few studies have determined the possible contribution to corrosion of titanium made by biofilm architecture. We investigated the interaction between the oral Streptococcus sanguis biofilm architecture and its influence on titanium corrosion in enriched artificial saliva usi...

There is a wide range of engineering systems where either the efficiency, the cost, or the reliability and lifetime is limited by high temperature corrosion processes. This includes gas turbines, boilers of various kinds, coal gasifiers, reformers and catalytic regenerators in the petrochemical industry, and heat exchangers and heat recovery systems of many kinds. The issues can largely be sepa...

The European Cosmetics Directive and REACH have accelerated the need for alternative tests. Especially the animal testing ban of cosmetic ingredients from 2009 strongly impacts on the timely delivery of relevant methods. ECVAM's key area "topical toxicity" focuses on skin and eye irritation/corrosion, phototoxicity and percutaneous absorption. Regulatory accepted alternative tests are available...

304 stainless steel was tested under the media without Sulfate-reducing bacteria (SRB) and with SRB. The corrosion behaviors of 304 stainless steel in SRB and without SRB medium were studied by measuring the open circuit potential, the polarization curves and electrochemical impedance Spectrum,weight loss measurements to get the changes of fore-and-aft corrosion fouling. The open circuit potent...

This thesis considers a nanotechnology approach based on the production of metals pre-treatments and organic coatings (a complete protection system at all) designed from the nanoscale. The final aim is to develop protection systems with improved corrosion protection properties and a low environmental impact. In particular, multifunctional silane hybrid molecules were used to design sol-gel pre-...