In this article, MC nylon/carbon nano tubes (CNTs) composites were prepared by in-situ polymerization method. The friction and wear properties were determined. The sample wear surface morphology carried out by scanning electron microscope (SEM) and the wear mechanism was investigated. It was found that the friction coefficient of composites has decreased with the amount of CNTs increasing in th...

BACKGROUND Excessive shoe heel abrasion is of concern to patients and shoe manufacturers, but little scientific information is available about this feature and its possible causes. The purpose of this study was to relate this phenomenon with biomechanical factors that could predispose to shoe heel abrasion. METHODS Ninety-seven recruits (median age 25) were enrolled in this study. Shoe abrasi...

Laser cladding process was performed on a commercial Ti-6Al-4V (α + β) titanium alloy by means of tungsten carbide-nickel based alloy powder blend. Nd:YAG laser with a 2.2-KW continuous wave was used with coaxial jet nozzle coupled with a standard powder feeding system. Four-track deposition of a blended powder consisting of 60 wt % tungsten carbide (WC) and 40 wt % NiCrBSi was successfully mad...

Sealers are used to enhance concrete durability through their ability to prevent moisture penetration and chloride intrusion, consequently improving the freeze-thaw performance of the concrete and preventing corrosion of the steel reinforcement, respectively. This paper summarizes three years of comprehensive field and laboratory investigations which were undertaken at the University of Manitob...

Progress on these topics is occasionally updated in Coating Materials News (CMN) issues since polymer substrates are being used with greater frequency in displays, solar panels, laminated window glazing, reflectors for illumination, and other optical applications. Injection molded or form cast polymer parts are now mass-produced as economical and light-weight replacements for glass parts. The s...

aown to the skull, situated 3i in. above the outer extremity of the right eyebrow. The frontal bone was fractured, the line of fracture being continuous with the line of fracture mentioned under injury No. 2. 4A lacerated wound directed transversely on the back of the head, 3 in. above the nape of the neck. 5. An abrasion on the right shoulder. 6. An abrasion on the right knee cap. 7. An abrasi...

Laser heat treatment (LHT) is applied herein after coating. Evaluation of the results was performed by studying microstructures via metallographic SEM/EDX microscopy, and mechanical properties were analyzed in terms microscopic hardness abrasion resistance. The objective this study to investigate effect LHT on wear resistance metal coatings. indicate influence microstructure chemical compositio...