Modified cellulose acetate (CA) membranes were prepared by dissolving the polymers in a mixture of acetone (AC) and N, N dimethylacetamide (DMAc) (70:30) solvent and deionized (DI) water was used in the coagulation bath. The introduction of polyethylene glycol (PEG) additive and TiO2 nanoparticles (NPs) into the casting solution has changed the structures of the resulting membranes during the p...

The increased production and use of nanoparticles (NPs) has generated concerns about their impact on living organisms. In this study, nCu, bulk Cu, nCuO, bulk CuO, Cu(OH)2 (CuPRO 2005, Kocide 3000), and CuCl2 were exposed for 15 days to 10 days-old hydroponically grown lettuce (Lactuca sativa) and alfalfa (Medicago sativa). Each compound was applied at 0, 5, 10, and 20 mg L(-1). At harvest, we ...

fluid invasion from water-based drilling mud (wbdm) into the shale formations causes swelling,high pressure zone near the wellbore wall, and eventually wellbore instability problems duringdrilling operations. for the stability of the wellbore, physical plugging of nanoscale pore throats couldbe considered as a logical approach toward avoiding the fluid invasion into the shale formation. thispap...

We report the formation mechanism of FePt nanoparticles (NPs) by a high temperature polyol method using an equimolar ratio of Fe and Pt-precursor with different Pt-precursors. Pt(acac)2, PtCl2, PtCl4 and H2PtCl6·H2O were used as Pt-precursors and Fe(acac)3 as the only Fe-precursor. Different stoichiometric compositions along with variation in size were obtained by using different precursors of ...

Iron containing porous organic polymers (Fe-POPs) have been synthesized by a facile one-pot bottom-up approach to porphyrin chemistry by an extended aromatic substitution reaction between pyrrole and aromatic dialdehydes in the presence of small amount of Fe(III). The Fe-POPs possess very high BET surface area, large micropores and showed excellent CO(2) capture (~19 wt%) at 273 K/1 bar.

In aerobic, circumneutral environments, the essential element Fe occurs primarily in scarcely soluble mineral forms. We examined the independent and combined effects of a siderophore, a reductant (ascorbate), and a low-molecular-weight carboxylic acid (oxalate) on acquisition of Fe from the mineral hematite (alpha-Fe(2)O(3)) by the obligate aerobe Pseudomonas mendocina ymp. A site-directed Delt...

A metal-based matrix is usually used for the fabrication of diamond bits in order to achieve favorable properties and easy processing. In the effort to reduce the cost and to attain the desired bit properties, researchers have brought more attention to diamond composites. In this paper, Fe-based impregnated diamond composites for drill bits were fabricated by using a pressureless infiltration s...

A chemical precursor mediated process was used to form catalyst nanoparticles (NPs) with an extremely high density (10(14) to 10(16) m(-2)), controllable size distribution (3-20 nm), and good thermal stability at high temperature (900 °C). This used metal cations deposited in layered double hydroxides (LDHs) to give metal catalyst NPs by reduction. The key was that the LDHs had their intercalat...

Strains lacking and overexpressing the vacuolar iron (Fe) importer CCC1 were characterized using Mössbauer and EPR spectroscopies. Vacuolar Fe import is impeded in Δccc1 cells and enhanced in CCC1-up cells, causing vacuolar Fe in these strains to decline and accumulate, respectively, relative to WT cells. Cytosolic Fe levels should behave oppositely. The Fe content of Δccc1 cells grown under lo...

In recent years, the use of high-Z nanoparticles (NPs) as potential tumor selective radiosensitizers has been proposed as a breakthrough in cancer radiotherapy (RT). NPs are capable of penetrating the cell and they lead to fewer adverse effects than conventional radiosensitizers [1]. Radiation sensitivity using NPs depends on cell line, irradiation energy, NPs type, size, concentration and dist...