We show that unintentional hydrogen doping of ZnO during the electrodeposition process can impact the material's carrier concentration as significantly as others have reported for intentional extrinsic doping. Mott-Schottky analyses on the natively n-type electrodeposits show a decrease in the carrier concentrations from 10(21) to 10(18) cm(-3) with increasing overpotential. A strong link exist...

An electrochemical synthesis strategy for the production of nanostructured films was developed by combining self-assembly of surfactant-inorganic aggregates at solid-liquid interfaces and an electrodeposition process. Through this approach high quality nanostructured ZnO films were cathodically deposited from a plating solution containing 0.1 wt % of sodium dodecyl sulfate (SDS). The resulting ...

High-density vertically aligned ZnO nanotube arrays were fabricated on FTO substrates by a simple and facile chemical etching process from electrodeposited ZnO nanorods. The nanotube formation was rationalized in terms of selective dissolution of the (001) polar face. The morphology of the nanotubes can be readily controlled by electrodeposition parameters for the nanorod precursor. By employin...

The extensive use of Cr(VI) in many industries and the disposal of Cr(VI)-containing wastes have resulted in Cr(VI)-induced environmental contamination. Cr(VI) compounds are associated with increased cancer risks; hence, the detection of toxic Cr(VI) compounds is crucial. Various methods have been developed for Cr(VI) measurement, but they are often conducted offsite and cannot provide real-tim...

The recent innovations in dry etching make it a promising technology for the fabrications of micromoulds. The high aspect ratios, directional freedom, low roughness, high etch rates and high selectivity with respect to the mask material allow a versatile fabrication process of micromoulds for subsequent electroplating and embossing, as is demonstrated with the DEEMO process. DEEMO is an English...

An acid-stable Zn(II) complex formulated as Zn2(HL)2(SO4)·H2O (1) and an acid-unstable complex formulated as Zn2L2·12H2O (2) were hydro(solvo)thermally synthesized and structurally characterized by single-crystal X-ray diffraction. Complex 1 features a uninodal 6-connected 2-fold interpenetrating three-dimensional (3D) dense architecture with {4(12)·6(3)}-pcu topology, and complex 2 exhibits a ...

This paper presents the low cost electrodeposition of a transparent and conductive chlorine doped ZnO layer with performances comparable to that produced by standard vacuum processes. First, an in-depth study of the defect physics by ab-initio calculation shows that chlorine is one of the best candidates to dope the ZnO. This result is experimentally confirmed by a complete optical analysis of ...

Zinc electrowinning is performed with the application of a current through insoluble electrodes (Pb-Ag), causing the electrolysis of zinc sulfate, with or without impurities, and zinc deposition on the cathode of aluminum. The impurities can reduce the current efficiency and increase the energy consumption in zinc electrolysis. In this work, the effect of nickel and magnesium on zinc electrodep...

We report the influence of zinc oxide (ZnO) seed layers on the performance of ZnO-based memristive devices fabricated using an electrodeposition approach. The memristive element is based on a sandwich structure using Ag and Pt electrodes. The ZnO seed layer is employed to tune the morphology of the electrodeposited ZnO films in order to increase the grain boundary density as well as construct h...

We report on hybrid films based on ZnO/organic dye prepared by electrodeposition using tetrasulfonated copper phthalocyanines (TS-CuPc) and Eosin-Y (EoY). Both the morphology and porosity of hybrid ZnO films are highly dependent on the type of dyes used in the synthesis. High photosensitivity was observed for ZnO/EoY films, while a very weak photoresponse was obtained for ZnO/TS-CuPc films. Des...