Austenitic carbon steels that exhibit excellent mechanical properties due to the twinning-induced plasticity effect have been studied extensively. On the other hand, austenitic stainless steels usually achieve good strength and ductility via transformation-induced plasticity. However, relying on martensite transformation for strength may cause problems such as delayed cracking. Therefore, the t...

The objective of this paper is to provide a state of the art review of the application of yield-line analysis to cold-formed steel members, and present a newly developed solution to the stresses that develop in an inclined yield-line. Yield-line analysis in cold-formed steel members is shown to be distinct from traditional yield-line applications. Challenges in the application of yield-line ana...

Orientation and temperature dependence of yield stress or CRSS (Critical Resolved Shear Stress) and tension/compression anisotropy of the yield stress or CRSS have been shown by Shah and Duhl (1), Heredia and Pope (2), and Miner et al. (3). Tension/compression asymmetry in the yield strength of Ni-based superalloys has been explained in terms of the “core width effect” (4). Shah and Duhl (5) ob...

The present study was undertaken to investigate the effect of pre-aging and aging parameters (time and temperature) on the mechanical properties of Al-Mg-Zn (7075) alloys. Ultimate tensile strength, 0.5% offset yield strength and % elongation measurements were carried out on specimens prepared from cast and heat treated 7075 alloys. Aging treatments were carried out for the as solution treated ...

The present study was undertaken to investigate the effect of pre-aging and aging parameters (time and temperature) on the mechanical properties of Al-Mg-Zn (7075) alloys. Ultimate tensile strength, 0.5% offset yield strength and % elongation measurements were carried out on specimens prepared from cast and heat treated 7075 alloys. Aging treatments were carried out for the as solution treated ...

the properties of alkaline sulfite anthraquinone (as/aq) pulp from old corrugated container (occ)was studied. in each trial 100 grams (based on dry weigth) of occ and 18% active alkali was used.three levels of anthraquinone (0.0.1 and 0.2% based on dry weigth of the occ) and two pulpingtimes (120 and 150 minutes at maximum pulping temperature) were applied. pulping temperature,na2so3/naoh ratio...

Inverse linear relationships between soil strength and yield in Coastal Plain soils that have subsurface genetic hard layers have previously been developed for corn (Zea mays L.), soybean (Glycine max L. Merr.), and wheat (Triticum aestivum L.) grown under management systems that include annual or biannual non-inversion deep tillage. In a field study in the southeastern Coastal Plains of the US...

Original scientific paper Based on the experimental research on three cross-shaped columns with 500 MPa grade reinforcing steel bars, the contrastive analysis is made on failure mode, bearing capacity and displacement ductility of each column specimens with different stirrup spacing under the identical axial compression ratio. The research shows that the longitudinal bars yield before spalling ...

This paper presents the mechanical properties of high strength structural steel and mild structural steel at elevated temperatures. Mechanical properties of structural steel at elevated temperatures are important for fire resistant design of steel structures. However, current design standards for fire resistance of steel structures are mainly based on the investigation of hot-rolled carbon stee...