Offshore wind farm wakes were observed and photographed in foggy conditions at Horns Rev 2 on 25 January 2016 at 12:45 UTC. These new images show highly contrasting conditions regarding the wind speed, turbulence intensity, atmospheric stability, weather conditions and wind farm wake development as compared to the Horns Rev 1 photographs from 12 February 2008. The paper examines the atmospheric...

Considering loads when optimizing wind-farm layouts or designing farm-control strategies is important, but the computational cost of using high-fidelity wake models in loop can be prohibitively high. Using simpler that consider only spatial variation turbulence statistics a tempting alternative, accuracy these with respect to aeroelastic response not well understood. This paper therefore highli...

The flow structure in the wake of a model wind turbine is explored under negligible and high turbulence in the freestream region of a wind tunnel at Re ∼ 7× 104. Attention is placed on the evolution of the integral scale and the contribution of the large-scale motions from the background flow. Hotwire anemometry was used to obtain the streamwise velocity at various streamwise and spanwise locat...

in this paper, in order to increase the efficiency, to reduce the cost and to prevent the failures of wind turbines, which lead to an extensive break down, a robust fault diagnosis system is proposed for v47/660kw wind turbine operated in manjil wind farm, gilan province, iran. according to the acquired data from iran wind turbine industry, common faults of the wind turbine such as sensor fault...

An isolated small wind turbine emulator based on a separately excited DC motor is developed to evaluate the performance of small wind turbine control strategies. The test rig consists of a 3HP separately excited DC motor coupled to a synchronous generator. A dump load is connected to the generator through a buck-boost converter controlled by a microcontroller. Wind turbine rotor and furling dyn...

The objective of this research is (1) to design and construct the wind turbine simulator based on the adjustable actual wind speed. (2) To investigate the wind distribution, and (3) tobe applied for testing the power output of the micro-wind turbine in the laboratory. Design and CAD drawing was applied to construct the wind turbine simulator prototype.The 3 phase induction motor with axial fan ...

We have developed a new wind turbine system that consists of a diffuser shroud with a broad-ring brim at the exit periphery and a wind turbine inside it. The shrouded wind turbine with a brimmed diffuser has demonstrated power augmentation by a factor of about 2–5 compared with a bare wind turbine, for a given turbine diameter and wind speed. This is because a low-pressure region, due to a stro...

Abstract In this article, we provide a methodological framework for designing the scanning strategies of nacelle-mounted lidars wind energy field experiments, and apply it at two major experimental campaigns. For Rotor Aerodynamics, Aeroelastics, Wake project (RAAW), leverage on one turbine to characterize incoming turbulence wake. American WAKE experimeNt (AWAKEN), use four top turbines in lar...