In a recent theoretical study, Li and Firoozabadi showed that if the wettability of porous media can be altered from preferential liquid-wetting to preferential gas-wetting, then gas well deliverability in gas condensate reservoirs can be increased. In this paper, we present the results that the wettability of porous media may indeed be altered from preferential liquid-wetting to preferential g...

Chemical agglomeration can reduce the particulates (including PM2.5) concentration emitted from fly ash particulates and the wet flue gas desulfurization (WFGD) system. However, the calcium-based slurries affect the regulation of agglomeration compared to water, in particular, the wettability of the particulates and the viscosity of the calciumbased slurry. The wettability and the viscosity are...

Capillary pressure/saturation data are often difficult and time consuming to measure, particularly for non-water-wetting porous media. Few capillary pressure/saturation predictive models, however, have been developed or verified for the range of wettability conditions that may be encountered in the natural subsurface. This work presents a new two-phase capillary pressure/saturation model for ap...

Graphene as one type of well-known solid lubricants possesses different nanotribological properties, due to the varied surface and structural characteristics caused by different preparation methods or post-processes. Graphene nanosheets with controllable surface wettability and structural defects were achieved by plasma treatment and thermal reduction. The nanotribological properties of graphen...

The petroleum industry requires the best materials to reverse the rock wettability to water-wet state which give significantly improved oil recovery.Nanoparticles are suggested as enhanced oil recovery potential agents to decrease viscosity and alter the wettability of reservoir towards more water-wet. This study provides new insights into CuO nanoparticles effects on wett...

Chemical-flooding schemes for recovering residual oil have been in general less than satisfactory due to loss of chemicals by adsorption on reservoir rocks, precipitation, and resultant changes in rock wettability. Adsorption and wettability changes are determined mainly by the chemical structure and mix of the surfactants, surface properties of the rock, composition of the oil and reservoir fl...

Reservoir wettability is determined by complex interface boundary conditions acting within the pore space of sedimentary rocks. These conditions have a dominant effect on interface movement and associated oil displacement. Wettability is a significant issue in multiphase flow problems ranging from oil migration from source rocks to such enhanced recovery processes as alkaline flooding or altern...

This study investigated the effect of plasma treatment on changes of surface wettability of wood flooring from two Brazilian tropical species, Hymenaea spp. (rode locus) and Tabebuia spp. (lapacho). Wood flooring samples were plasma treated at low pressure in a helium atmosphere. Energy level was set at 100 W and four glow discharge times (5, 15, 30 and 45 s) were tested. Changes in wettability...

Impressions, dentures and other dental appliances may be contaminated with oral micro-flora or other organisms of varying pathogenicity from patient's saliva and blood. Several approaches have been tried to control the transmission of infectious organisms via dental impressions and because disinfection is less effective and has several drawbacks for impression characterization, several steriliz...

The wettability of graphitic carbon and silicon surfaces was numerically and theoretically investigated. A multi-response method has been developed for the analysis of conventional molecular dynamics (MD) simulations of droplets wettability. The contact angle and indicators of the quality of the computations are tracked as a function of the data sets analyzed over time. This method of analysis ...