Self-lubricating bearings in hydropower applications are often lubricated with water under boundary lubricating conditions. Polyhydric alcohols replacing water have shown the potential to reduce both friction and wear. The objective of this work is, therefore, to evaluate the effect of a polyhydric alcohol-based environmentally-acceptable lubricant (EAL) on the friction and wear of self-lubrica...

OBJECTIVE This study tested whether the two-body wear of monolithic zirconia and their corresponding enamel antagonists was higher compared to monolithic alloy and veneered zirconia. MATERIALS AND METHODS Cylindrical specimens (N = 36, n = 6) were prepared out of (A) veneered zirconia (VZ), (B) glazed zirconia using a glaze ceramic (GZC), (C) glazed zirconia using a glaze spray (GZS), (D) man...

A review is given of the various ways in which humidity and liquid water can influence the friction and wear of metals, polymers, carbons and graphite, lamellar solid lubricants and ceramics. Compared with dry sliding, water usually reduces friction of materials to a limited extent, except for MoS2, but wear rates change depending on the materials concerned. Most of the fundamental mechanisms i...

Background A sizable increase in the outbreak of tooth attrition and especially dental erosion has been observed. Detection of tooth wear, proper prevention, and effective intervention in the early stage will avoid the adverse effect on teeth performance and elegance. Thus, the current study aimed to determine the level of awareness of senior dental students (general dentists) about the preval...

OBJECTIVES Wear simulations may provide an indication of the clinical performance of pit-and-fissure sealants when associated with primary teeth as counterbody, restricting the involved variables. The aim of this study was to evaluate wear of dental materials used as pit-and-fissure sealants in contact with primary teeth. MATERIALS AND METHODS A resinous sealant (Fluroshield(®)) and a resin-m...

Cross-linked polyethylenes are being marketed by orthopaedic manufacturers to address the problem of osteolysis caused by polyethylene particulate wear debris. Wear testing of these cross-linked polyethylenes in hip simulators has shown dramatic reduction in wear rate compared with standard ultrahigh molecular weight polyethylene, either gamma irradiated in air or nitrogen - or ethylene oxide-s...

In the present study, enamel wear against indirect composite resins was evaluated using two newly designed wear test methods: a rotating sliding wear test and a buff wear test. For the composite resins investigated in this study, their surface morphologies were examined using a scanning probe microscope after buff-polishing. After the wear tests, enamel was worn down by hard fillers that protru...

The aim of this paper is to focus on the effect of cryogenic treatment on the microstructure, mechanical and wear properties of Al 6061 and Al 8011.  The first objective was to understand the degree to which hardness of these aluminium grades have been enhanced by giving  cryogenic on the specimens. The second objective is to check the wear resistance property of these two aluminium specimens i...

Define tribology and discuss its effect on total hip arthroplasty (THA). Tribology is defined as the science of interacting surfaces in relative motion and includes the principles of friction, lubrication, and wear of implant materials. Tribology of the articulating materials in THA is the most important issue for long-term survival of the implants because the fixation of implants either with o...

Damage to mechanical components caused by wear is considered to be an important issue for mechanical engineers. For the purpose of wear resistance, it is necessary to improve the material properties of the mechanical elements. Furthermore, low friction plays an important role in saving energy. Hence, it is important to establish a key technology for wear resistance and low friction through appr...