Extensive research efforts have been devoted to understand the complex mechanisms of wear with the aim to minimize wear in sliding systems. Improvements in the instruments used for the characterization of the wear phenomenon are required to enhance the effectiveness of research method. In this paper, we report the design of an experimental platform that enables in-situ observation of the surfac...

Nanoindentation with spherical and Berkovich indenters, reciprocating wear and dynamic impact tests were conducted to investigate the deformation and wear behavior of two Zr-based metallic glasses. The results indicated that the indenter shape may have an effect on the displacement bursts in the load-penetration curves as no apparent bursts could be observed when a Berkovich indenter was used. ...

The behavior of different materials under macrotribological and nanotribological conditions has been compared. The materials, hydrogenated amorphous diamondlike carbon, highly ordered pyrolitic graphite, and mica, were submitted to a fretting test ~macrotribological behavior! and a combined atomic force microscopy/lateral force microscopy ~AFM/LFM! ~nanotribological behavior!. The coefficient o...

In this study, we explore the wear behavior of amplitude modulation atomic force microscopy (AM-AFM, an intermittent-contact AFM mode) tips coated with a common type of diamond-like carbon, amorphous hydrogenated carbon (a-C:H), when scanned against an ultra-nanocrystalline diamond (UNCD) sample both experimentally and through molecular dynamics (MD) simulations. Finite element analysis is util...

This paper presents the wear characteristics of the composite ceramic coating made with Al2O3-40wt%8YSZ on the biomedical grade Ti-6Al-4V alloy (grade 5) used for total joint prosthetic components, with the aim of improving their tribological behavior. The coatings were deposited using a plasma spraying technique, and optimization of plasma parameters was performed using response surface method...

Backside wear due to micromotion and poor conformity between the liner and its titanium alloy shell may contribute to the high rates of retroacetabular osteolysis and consequent aseptic loosening. The purpose of our study was to understand the wear process on the backside of polyethylene liners from two acetabular cup systems, whose locking mechanism is based on a press-fit cone in combination ...

Shape memory alloys are well recognized functional and smart materials, which have been exploited to develop intelligent structures and devices in many fields. Of particular importance is its exciting application in the field of biomechanical engineering. In addition, further potential applications of shape memory alloys are being investigated, such as shape memory alloys-based functional compo...

Titanium alloys are extensively used in various fields of engineering, medicine, aerospace, marine due to its excellent mechanical properties. Its usage is more pronounced today in the field of biomedical implants due to its superior biocompatibility, corrosive resistance and high strength to weight ratio. It has poor abrasive wear resistance due to high coefficient of friction and low thermal ...

In this research, B4C-Ni cermet coating was sprayed on the surface of 4130 steel from B4C and Ni feed-stockpowders using high velocity oxy-fuel (HVOF) method. In order to characterize the tribological behavior of thecoating, ball on disk wear tests were done at the ambient temperature and under the loads of 1, 3 and 5 N.Phase analysis of the coating after spraying was studied ...

In this research, tribological characteristics of Ni-P electroless coating and double-layered Ni-P/Ni-B electroless coating were studied. For this purpose, Ni-P electroless coating with 25 μm thickness was initially applied to the surface of steel Ck45 samples; then, a double-layered Ni-P/Ni-B electroless coating, including inner layer of Ni-P with 15 μm thickness and outer layer of Ni-B with 1...